View 71-251181_6465313.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

amphenol miniature cylindrical connectors 12-070-15 meets mil-c-26482, series 1 specifications ? amphenol corporation amphenol industrial operations amphenol aerospace 40-60 delaware avenue, sidney, new york 13838-1395 phone: 800-678-0141 or 607-563-5011 fax: 607-563-5157 www.amphenol-industrial.com amphenol
table of contents page no. introduction, amphenol ? miniature cylindrical general information, design flexibility . . . . . . . . . . . . . . . . . . .1, 2 connector selection guide . . . . . . . . . . . . . . . . . . . . . . . . . . 3 insert availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4, 5 insert availability breakaway twist pull. . . . . . . . . . . . . . . . . . . . . . . 6 alternate positioning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 insert arrangement patterns . . . . . . . . . . . . . . . . . . . . . . . . . . 8-11 pt, sp, ms/pt proprietary/mil-c-26482, series 1 bayonet coupling, solder contacts general information, specificati ons, service class . . . . . . . . . . . 12, 13 pt00 (ms3110), sp00 wall mounting receptacle . . . . . . . . . . . . . . 14 pt01 (ms3111) cable connecting receptacle . . . . . . . . . . . . . . . . 15 pt02 (ms3112) sp02 box mounting receptacle . . . . . . . . . . . . . . 16 pt06 (ms3116) sp06 straight plug . . . . . . . . . . . . . . . . . . . . . 17 pt07 (ms3114) sp07 jam nut receptacle . . . . . . . . . . . . . . . . . . 18 pt08e, sp08e 90 degree plug . . . . . . . . . . . . . . . . . . . . . . . 19 pt connectors with printed circuit board contacts - box mount receptacle, jam nut receptacle. . . . . . . . . . . . . . . . . . 20 ptb, spb thru bulkhead receptacle . . . . . . . . . . . . . . . . . . . . . 21 general information, specifications - pt hermetic . . . . . . . . . . . . . 22 ptih (ms3113h) hermetic solder mounting receptacle . . . . . . . . . . . 23 pt02h hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 24 pt07h (ms3114h) hermetic jam nut receptacle . . . . . . . . . . . . . . 25 pt breakaway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . . 26 pt, sp, ms/pt how to order . . . . . . . . . . . . . . . . . . . . . . . . 27 pt-se, sp-se, ms/pt-se proprietary/mil-c-26482, series 1 bayonet coupling, crimp contacts general information, specificati ons, service class . . . . . . . . . . . 28, 29 pt00se (ms3120), sp00se wall mounting receptacle . . . . . . . . . . . 30 mf00se (ms3128) wall mounting receptacle . . . . . . . . . . . . . . . . 31 pt01se (ms3121) sp01se cable connecting receptacle . . . . . . . . . 32 pt02se (ms3122) sp02se box mounting receptacle . . . . . . . . . . . 33 mf02se (ms3127) box mounting receptacle . . . . . . . . . . . . . . . . 34 pt06se (ms3126), sp06se straight plug . . . . . . . . . . . . . . . . . 35 pt07se (ms3124) sp07se jam nut receptacle . . . . . . . . . . . . . . 36 pt08se, sp08se 90 degree plug . . . . . . . . . . . . . . . . . . . . . 37 pt-se breakway twist pull plug . . . . . . . . . . . . . . . . . . . . . . . 38 pt-se, sp-se, ms/pt-se how to order . . . . . . . . . . . . . . . . . . 39 pt-ce, sp-ce bayonet coupling, crimp contacts general information, specificati ons, service class . . . . . . . . . . . 40, 41 pt00ce, sp00ce wall mounting receptacle . . . . . . . . . . . . . . . . 42 pt01ce, cable connecting receptacle . . . . . . . . . . . . . . . . . . . 43 pt02ce, sp02ce box mounting receptacle . . . . . . . . . . . . . . . . 44 pt06ce, sp06ce straight plug . . . . . . . . . . . . . . . . . . . . . . . 45 pt07ce, sp07ce jam nut receptacle. . . . . . . . . . . . . . . . . . . . 46 pt08ce, sp08ce 90 degree plug . . . . . . . . . . . . . . . . . . . . . 47 pt-ce breakawat twist pull plug . . . . . . . . . . . . . . . . . . . . . . 48 pt-ce, sp-ce how to order. . . . . . . . . . . . . . . . . . . . . . . . . 49 pc threaded coupling, solder contacts general information, specificati ons, service class . . . . . . . . . . . 50, 51 pc00 wall mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 52 pc01 cable connecting receptacle . . . . . . . . . . . . . . . . . . . . . 53 pc02 box mounting receptacle . . . . . . . . . . . . . . . . . . . . . . . 54 pc06 straight plug . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 pc07 jam nut receptacle . . . . . . . . . . . . . . . . . . . . . . . . . . 56 general information, specifications - pc hermetic . . . . . . . . . . . . . 57 pcih hermetic solder mounting receptacle . . . . . . . . . . . . . . . . . 58 pc02h hermetic box mounting receptacle . . . . . . . . . . . . . . . . . 59 pc07h hermetic jam nut receptacle. . . . . . . . . . . . . . . . . . . . . 60 pc how to order . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 pc-se, pc-ce threaded coupling, crimp contacts general information, specifications , service class . . . . . . . . . . . . . 62 pc-se, pc-ce how to order . . . . . . . . . . . . . . . . . . . . . . . . 63 accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64-68 application tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 contacts, power and thermocouple crimp. . . . . . . . . . . . . . . . . . . . 70 contacts, shielded coax . . . . . . . . . . . . . . . . . . . . . . . . . . . 71-76 mounting recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 other amphenol miniature cylindrical connectors . . . . . . . . . . . . . . 78, 79 amphenol sales office and authorized distributor listing . . . . . . . . . . . . 80 proprietary/mil-c-26482 series 1 connectors covered in this catalog are widely used in gen- eral duty and environmental applications, both industrial and military. markets that use this family of connectors include: ? instrumentation ? monitoring equipment ? machine tool, factory automation ? communications ? geophysical ? industrial controls and robotics ? oil and petrochemical industries ? rail/mass transit ? military/aerospace if more information is needed concerning the con- nectors covered in this publication, or if there are special application needs, please contact: amphenol corporation amphenol aerospace amphenol industrial operations 40-60 delaware avenue sidney, new york 13838-1395 telephone: 607-563-5011 fax: 607-563-5351 please go to the amphenol websites to view, download and save this catalog and most all of amphenol interconnection product literature. www.amphenol-industrial.com www.amphenol-aerospace.com some miniature connector styles are available in rohs compliant versions. please contact amphenol industrial operations for more information. amphenol operates quality systems that are cer- tified to iso9001: 2000 by third party registrars. note: the connector products in this brochure were formerly known as bendix ? products. these products are now manufactured and sold under the amphenol ? brand name. the name ?amphenol? will replace the name ?bendix? on products and literature in the future. note: the miniature mil-c-26482, series 2 connectors pts- dr and ms/pts-dr (formerly in this catalog) are no longer supplied with these designations. amphenol now supplies the amphenol ? /matrix ? mil-c-26482, series 2. (military numbers include ms3470 - ms3472, ms3474, - ms3476). please refer to page 78 for a brief description of the amphenol ? /matrix ? mil-c-26482, series 2 bayonet coupling connectors with crimp, rear insertable and rear releasable contacts, and ask for catalog 12-071 for detailed information on this series. r o h s a m p h e n o l e u / 2 0 0 2 / 9 5 / e c
1 amphenol miniature cylindrical connectors proprietary/mil-c-26482, series 1 ? amphenol ? miniature cylindrical connectors offer twice the number of contacts in just half the size of a standard connector. these miniature connectors, are available in several series, each with varying design characteristics and customer options to meet co st con- siderations and provide maximum design flexibility. there are two styles within the family that are ms approved and qualified t o mil- c-26482, series 1, and in addition there are several proprietary styles. common features of all styles: ? all are for general duty applications and environmental sealing is achieved with the grommet and clamp design. ? operating temperature is from ?55c to +125; operating voltage to 1000 vac (rms) at sea level. ? pin and socket contacts are machined from low loss copper alloy and gold plated to eliminate contact corrosion and provide an indefinite shelf life. ? all have resilient inserts which provide high dielectric strength and moisture barrier. ? a variety of shell finishes (including non-cadmium) and a variety of backend accessories are available within the styles. options ? 7 shell styles with 60 insert patterns ? hermetic seal (glass fusion) recepta- cle styles available ? pressurized thru bulkhead recepta- cle style available ? breakaway quick disconnect styles ? emi filter protection styles ? pre-installed coax solder contacts are available ? printed circuit board contacts are available bayonet coupling with solder contact termination pt, ms/pt (solder) ? ms and proprietary versions ? factory installed solder contacts ? 3 point bayonet coupling and 5 key/keyway mating. ? intermateable with all miniature series connectors except threaded pc series. ? ms/pt meets mil-c-26482 series 1, service classes e, f and p. ? ms/pt is ul recognized. sp (solder) ? sp series is a modification of the pt with same features except a wider flange for back panel mounting bayonet coupling with crimp contact termination pt-se, ms/pt-se (crimp) ? ms and proprietary versions ? crimp rear insertable/front release contact termination. (closed entry socket insert prevents probe damage). ? 3 point bayonet coupling and 5 key/keyway mating. ? intermateable with all miniature series connectors except threaded pc series. ? ms/pt-se meets mil-c-26482 series 1, service classes e, f, p. sp-se (crimp) ? modification of the pt-se with wider flange for back panel mounting pt-ce, sp-ce (crimp) ? incorporates a special one-piece insert and grommet assembly threaded coupling with solder contact termination pc (solder) proprietary ? double stub threaded coupling and single hole polarization. ? factory installed solder contacts threaded coupling with crimp contact termination two threaded pc styles are offered in some shell sizes. both have crimp front release and front removable contacts, but they have differ- ent retention systems. pc-se (crimp) proprietary - with spring tower retention system ? spring tower retention system pc-ce (crimp) proprietary - with nylon wafer dielectric system options ? 6 shell styles with 47 insert patterns ? breakaway quick disconnect style available ? coax and thermocouple contacts are available options ? 5 shell styles with 60 insert patterns ? hermetic receptacles available ? pressurized thru bulkhead recepta- cle style available ? pre-installed coax solder contacts are available. options ? 5 shell styles (consult amphenol for availability of shell sizes and insert patterns) pt solder jam nut receptacle and mated straight plug pt-se crimp wall mount receptacle and mated straight plug pt solder wall mount receptacle pc threaded crimp straight plug and wall mount receptacle
2 amphenol miniature cylindrical design flexibility the large family of miniature proprietary and ms style connectors provides for many optional features and designs. in addition to the choices of bayonet or threaded shells, solder or crimp termination within the style variations, there are additional options that are shown here. hermetics hermetically sealed receptacles have fused compression glass sealed inserts which provide envionrmental moisture sealing. there are three hermetic styles within the pt bayonet series and three hermetic styles within the pc threaded series. coaxial contacts amphenol miniature connectors can incorporate shielded coax contacts. size 8 and 12 crimp coax contacts are available in pt-se, sp-se, ms/pt-se. factory installed size 8 and 12 solder type coax contacts are available in pt, sp,ms/pt connectors. see coax contact information pages at the end of this catalog. printed circuit board tail contacts pt bayonet connectors in box mounting receptacle and jam nut receptacle styles are avail- able with printed circuit board contacts. standard pcb tails for mil-c-26482 connectors have gold plating, .0050 inches over nickel. see page 20 and call amphenol for further infor- mation. flex circuitry flex termination assemblies for attaching cylindrical connectors to printed circuit boards are available through the amphenol division act, advanced circuit technology. flex can be used with miniature 26482 connectors and it can be designed to meet specific length, current carrying capacity and to fit the precise geometric shape of the connector to board package. flex circuity plugs into a printed circuit board and creates a self-locking terminal pad which eliminates the need for an additional interconnect to the pcb. breakaway, twist pull miniatures quick disconnect ?breakaway? styles are shown in this catalogs. these are available in pt solder style plugs (page 26), pt-se crimp style plugs (page 38) or pt-ce crimp style plugs (page 48). quick disconnect of the connector plug from the receptacle is accomplished with axial pull on the lanyard. this instant decoupling and damage free separation is ideal for weapons release and blind or difficult accessibility situations. separation forces vary per connector series. the plug and receptacle need to be fully mated before disengagement by the lanyard pull. filter protection amphenol offers the fpt series which combines the miniature pt series with an emi filter. designed to provide emi protection for sensitive circuits, each circuit is individually filtered within the con- nector, eliminating the need for costly and bulky exterior network filters. filter contacts are available in mf, hf, vhf, and uhf ranges and are intermateable and intermountable with mil-c- 26482 connectors. for further information see catalog 12-120, amphenol emi filter transient protection connectors. (online at www.amphenol-aerospace.com). overmolded cable overmold seals and cables can be designed for almost any industrial application. a variety of materials are available: neoprene, hypalon and others; and a variety of lengths can be designed to meet customer specifications. overmold seals to the rear of the connector and to the cable jacket providing moisture sealing. ? 26482 connector with pc tail contacts breakaway twist pull 26482 26482 connector with flex 26482 connector with hermetic seal insert and coax contacts 26482 connector with emi filter protection 26482 connector with overmolded cable
3 the accompanying chart is provided to assist the user in selecting the appropriate type of miniature connector to meet the application requirements. further information can be found in specific sections of this catalog. ri/fr = rear insertion/front releasable ? o intermates with o x intermates with x ?? optional finishes available. see ?how to order? sections. * available in hermetic version ** dual mounting holes *** this connector style is sometimes referred to as a cable connecting ?plug.? it does, however, mate with either a straight or 90 degree plug. amphenol ? /matrix ? mil-c-26482, series 2 bayonet coupling connectors with rear insertable and rear releaseable contacts are covered in another catalog - see pagexx for a brief description and see complete details in catalog 12-071 which is online at www.amphenol-aerospace.com. characteristics solder crimp pt ms/pt sp pc ms/ pt-se pt-se sp-se pc-se pt-ce sp-ce pc-ce intermateable? o o o x o o o x o o x contacts solder ???? crimp ri/fr ? ?????? contact retention system non-removable ???? removable ? ?????? coupling bayonet ??? ??? ?? threaded ??? standard finishes?? olive drab cadmium (003) ?? ?? ? anodic coated (005) ??? bright cadmium (001) ??? temperature range resilient dielectric (?55c to +125c) ? ? ? ? ? ?????? wide mounting flange ??? hermetic seal ???? shell style availability wall mounting receptacle ?00? ? ? ? ? ?**????? cable connecting receptacle ?01? *** ?? ??? ?? ? box mounting receptacle ?02? *? ? ? *? ?**????? straight plug ?06? ? ? ? ? ? ?????? jam nut receptacle ?07? *?*? ? *? ? ?????? thru-bulkhead receptacle ?tb? ?? solder mount receptacle ?i? *? *? *? 90 plug ?08? ? ? ? ????? amphenol miniature cylindrical connector selection guide ?
4 insert arrangement solder termination crimp termination total contacts contact size ms/pt pt sp pc hermetic pt ms-pt pc ms/pt-se pt-se sp-se pc-se pt-ce sp-ce pc-ce 201612 coax service rating 12 8 6-1 xxx x* 11 i 8-2 x xxx x x 22 i 8-3 x xxx x x 33 i 8-4 x xxx x x 44 i 8-33 xxx x x 33 i 8-98 xxx 33 i 10-2 x x x 2 2 i 10-5 x x x x* 5 5 i 10-6 x x x x x x x 6 6 i 10-70 x x x 1 1 coax 10-98 x x x x x* x 6 6 i 12-3 x x x x x x x 3 3 ii 12-4 x x x x* 4 4 i 12-8 x x x x x* x x 8 8 i 12-10 x x x x x x x 10 10 i 12-14 x x x 14 14 i 12-98 x x x 10 10 i 14-2 x x x 2 2 ii 14-4 s s s x 4 4 i 14-5 x x x x x x x 5 5 ii 14-8 x x x 8 6 2 i 14-12 x x x x x x x 12 8 4 i 14-15 x x x x x x x 15 14 1 i 14-18 x x x x x* x x 18 18 i 14-19 x x x x x x x 19 19 i 14-22 x* 5 1 4 i 14-71 p x x (02ce) 4 3 1 i 14-91 hv s x x x* 3 3 ** 14-aa x x x x 4 4 i 16-8 x x x x x x x 8 8 ii 16-23 x x x x x x 23 22 1 i 16-26 x x x x x x x 26 26 i 16-70 x x x 15 14 1 n/a 16-76??? x* 14 8 1 5 *** 16-99 x x x x x 23 21 2 i 18-5 x x x x* 5 5 ii 18-8 88 i 18-11 x x x x x x x 11 11 ii 18-30 x x x x x* x x 30 29 1 i amphenol miniature cylindrical insert availability ? *not available in ms version **flashover voltage 5,000 vac (rms) ***1500 vac (rms) sdesignates socket insert only. p designates pin insert only. ?size 12 contacts for #10 wire ??not presently tooled ???contacts must be ordered separately
5 insert arrangement solder termination crimp termination total contacts contact size ms/pt pt sp pc hermetic pt ms-pt pc ms/pt-se pt-se sp-se pc-se pt-ce sp-ce pc-ce 201612 coax service rating 12 8 18-32 x x x x x x x 32 32 i 18-71 x* 9 8 1 coax, ii 18-72 x x x 14 10 4 n/a 18-75 xxx 4 4 coax 18-76 431ii 18-80 xxx x 86 2coax, i 18-91 hv x* x 6 6 ** 20-16 x x x x x x x 16 16 ii 20-24 x xxx x 2424 i 20-25 x x x 25 25 i 20-26 x x x 26 20 6 i 20-27 x xxx x 2727 i 20-39 x x x x x x x 39 37 2 i 20-41 x x x x x x x 41 41 i 20-70 14 10 4 coax 20-90 hv x x x 7 7 hi-voltage 22-7 xxx x* 7 7coax 22-21 x x x x x x x 21 21 ii 22-25 x* 25 25 i 22-32 x x x x x p 32 32 i 22-34 xxx x 3434 i 22-36 xxx x 3636 i 22-41 x x x x x x x 41 27 14 i 22-55 x x x x x x x 55 55 i 22-70 x x x 19 13 6 i, coax 22-71 9 2 7 i, coax 22-72 x x x 19 12 4 3 n/a 22-78??? x* 7 7 coax 22-96 x* 7 7? ii 24-31 xxx x 31 31 i 24-51 x* 51 47 4 i 24-61 x x x x x x x 61 61 i 24-71 x x x 49 45 2 2 n/a 24-79 6 1 5 coax amphenol miniature cylindrical insert availability, cont. ? *not available in ms version **flashover voltage 5,000 vac (rms) ***1500 vac (rms) ?size 12 contacts for #10 wire ??not presently tooled ???contacts must be ordered separately insert availability
6 insert availability - breakway twist pull insert arrangement crimp termination solder termination total contacts contact size pt-ce pt-se pt 20 16 12 service rating 8-2 x x 2 2 i 8-3 x x 3 3 i 8-4 x x 4 4 i 10-2 x 2 2 i 10-6 x x x 6 6 i 10-98 x x 6 6 i 10-99 x x 7 7 i 12-3 x x x 3 3 ii 12-4 x 4 4 i 12-8 x x x 8 8 i 12-10 x x x 10 10 i 12-98 x 10 10 i 14-2 x 2 2 ii 14-5 x x x 5 5 ii 14-8 x 8 6 2 i 14-12 x x x 12 8 4 i 14-15 x x x 15 14 1 i 14-16 x 4 2 2 ii 14-18 x x x 18 18 i 14-19 x x x 19 19 i 14-91 x x 3 3* h.v. 16-6 x 6 6 i 16-8 x x x 8 8 ii 16-23 x x x 23 22 1 i 16-26 x x x 26 26 i 16-99 x x 23 21 2 i 18-5 x x 5 5 ii 18-11 x x x 11 11 ii 18-28 x x 28 26 2 i 18-30 x x x 30 29 1 i 18-32 x x x 32 32 i 18-91 x x 6 6* h.v. 20-8 x 8 8 i 20-16 x x x 16 16 ii 20-24 x x 24 24 i 20-25 x 25 25 i 20-27 x x 27 27 i 20-39 x x x 39 37 2 i 20-41 x x x 41 41 i 22-8 x 8 8 ii 22-21 x x x 21 21 ii 22-25 x 25 25 i 22-32 x x x 32 32 i 22-34 x x 34 34 i 22-36 x x 36 36 i 22-41 x x 41 27 14 i 22-55 x x x 55 55 i 22-96 x 7 7? ii 22-97 x 16 16 ii 22-99 x 11 11 ii 24-31 x 31 31 i 24-61 x x x 61 61 i amphenol miniature breakaway twist pull insert availability ? * 5kv voltage rating ? size 12 contact for #10 wire. for further information regarding any additional insert patterns available in breakaway miniature connectors, please contact amphenol aerospace. for availability of shielded coax contacts within breakaway miniature connectors contact amphe- nol.the breakaway style pages are: pt (solder) breakaway plug is on page 26, the pt-se (crimp) breakaway plug is on page 38, and the pt-ce (crimp) breakaway plug is on page 48.
7 amphenol miniature cylindrical alternate positioning alternate positioning to avoid cross-plugging problems in applications requiring the use of more than one miniature cylindrical connector of the same size and arrangement, alternate insert rotations are available as indicated in the accompanying chart. as shown in the diagram at right, the front face of the pin insert is rotated within the shell in a clockwise direction from the normal shell key. the socket insert would be rotated counterclockwise the same number of degrees in respect to the normal shell key. position w position x position y position z views looking into front face of pin insert or rear of socket insert. a b a b a b a b insert rotation shell size insert arrangement degrees wx y z 6 6-1 ???? 8 8-2* 58 122 ? ? 8 8-3 60 210 ? ? 88-4*4597184? 8 8-33* 90 ? ? ? 8 8-98 ???? 10 10-2 45 90 315 ? 10 10-5* 45 151 180 270 10 10-6* 90 ? ? ? 10 10-70 ???? 10 10-98* 90 180 240 270 12 12-3* ? ? 180 ? 12 12-4* 38 ? ? ? 12 12-8 90 112 203 292 12 12-10* 60 155 270 295 12 12-14 ???? 12 12-98* 61 135 189 340 14 14-2 58 122 ? ? 14 14-4* 45 ? ? ? 14 14-5* 40 92 184 273 14 14-8 48 162 189 312 14 14-12* 43 90 ? ? 14 14-15* 17 110 155 234 14 14-18* 15 90 180 270 14 14-19* 30 165 315 ? 14 14-22 45 ? ? ? 14 14-71 ???? 14 14-91hv ? 60 ? ? 14 14-aa* 45 ? ? ? 16 16-8* 54 152 180 331 16 16-23 158 270 ? ? 16 16-26* 60 ? 275 338 16 16-70 41 122 216 286 16 16-76 ???? 16 16-99* 66 156 223 340 18 18-5 55 97 263 315 18 18-8 180 ? ? ? * available in hermetic class insert rotation shell size insert arrangement degrees wx y z 18 18-11* 62 119 241 340 18 18-30* 180 193 285 350 18 18-32* 85 138 222 265 18 18-71 18 108 127 215 18 18-72 53 102 213 293 18 18-75 45 ? ? ? 18 18-76 ???? 18 18-80 45 90 135 160 18 18-91hv 90 180 240 270 20 20-16* 238 318 333 347 20 20-24 70 145 215 290 20 20-25 72 144 216 288 20 20-26 13 107 210 322 20 20-27 72 144 216 288 20 20-39* 63 144 252 333 20 20-41* 45 126 225 ? 20 20-70 63 135 222 335 20 20-90 45 135 225 315 22 22-7 19 41 ? ? 22 22-21* 16 135 175 349 22 22-25 60 125 211 336 22 22-32 72 145 215 288 22 22-34 62 142 218 298 22 22-36 72 144 216 288 22 22-41 39 135 264 ? 22 22-55* 30 142 226 314 22 22-70 30 82 218 312 22 22-71 33 191 236 270 22 22-72 42 200 277 339 22 22-78 19 41 ? ? 22 22-96* 19 41 ? ? 24 24-31 90 225 255 ? 24 24-51 22 171 313 ? 24 24-61* 90 180 270 324 24 24-71 39 131 205 281 24 24-79 ???? ?
8 a b a b c a b c d a c b a c b a d c b e a f e d c b a f e dc b a c b a d c b a h g f e d c b a kj h g f e d c b a p n m l k j h f e d c b r a d c b h g f e m l k j a h g f e d c b m l k j r p n a d c b h gf e m l k jp n u t sr a d c b h g f e m l k j t s r p n u v amphenol miniature cylindrical insert arrangements ? front face of pin inserts illustrated insert arrangement 6-1 8-2 8-3 8-4 8-33 8-98 10-2 service rating iiiiiii number of contacts1234332 contact size 20 20 20 20 20 20 16 insert arrangement 10-5 10-6 10-70 10-98 12-3 12-4 12-8 service rating i i coax i ii i i number of contacts5616348 contact size 20 20 8 coax 20 16 16 20 insert arrangement 12-10 12-14 12-98 14-2 14-4 14-5 14-8 service rating i i i ii i ii i number of contacts 10 14 10 2 4 5 6 2 contact size 20 20 20 12 12 16 20 12 insert arrangement 14-12 14-15 14-18 14-19 14-22 14-71 14-91hv service rating iiiiii number of contacts 8 4 14 1 18 19 1 4 3 1 3 contact size 20 16 20 16 20 20 20 12 16 8 coax 20 for contact legend see page 61. a d c b e d a c b a c b a d b c flashover 5,000 vac (rms) ba a b c d e f g h j k a b h c d e f g a e dc b
9 insert arrangement 18-75 18-76 18-80 18-91 hv service rating coax ii i, coax number of contacts 4 3 1 6 2 6 contact size 8 coax 12 coax 8 coax 20 8 coax 20 a d c b h g f e a h g f e d c b p n m l k j z y x w v u t s r a z y x w v u t s r p n m l k j h g f e d c b a b c a m l k j h g f e d c b p n a m l k j h g f e d c b t s r p n z y x w v u a e dc b a h g f ed c b a l k j h g f e d c b a z y x w v u t s r p n m l k j h g f e d c b a b c d e f g a z y x w v u t s r p n m l k j h g f e d c b a b c d e f g h j a h g f e d c b j a d c b a g f e d c b h amphenol miniature cylindrical insert arrangements ? front face of pin inserts illustrated insert arrangement 14-aa 16-8 16-23 16-26 16-70 service rating i ii i i n/a number of contacts 4 8 22 1 26 14 1 contact size 12 16 20 16 20 20 12 coax insert arrangement 16-76 16-99 18-5 18-8 18-11 service rating i ii i ii number of contacts 8 1 5 21 2 5 8 11 contact size 20 12* 2 coax* 20 16 12 12 16 insert arrangement 18-30 18-32 18-71 18-72 service rating i i ii, coax n/a number of contacts 29 1 32 8 1 10 4 contact size 20 16 20 16 8 coax 20 12 coax flashover 1.500 vac (rms) *contact positions optional a h b j k d l r e m f n g p c a b c m p l n d e h f g j k a d cb a d c b flashover 5,000 vac (rms) a f e dc b
10 a m l k j h g f e d c b s r p n a z y x w v u t s r p n m l k j h g f e d c b a a z y x w v u t s r p n m l k j h g f e d c b a b a z y x w v u t s r p n m l k j h g f e d c b a b c d a z y x w v u t s r p n m l k j h g f e d c b a r p n m k j h g f e d c b i q a z y x w v u t s r p n m l k j h g f e d c b a t s r p q n m k j i h g f e d c b a p n m l k j g f e d c b h a g f ed c b a g d c b f e a x w v u t s r p n m l k j h g f e d c b a z y x w v u t s r p n m l k j h g f e d c b a b a r p n m b b s a h c z t l c j g d y x k j h w v g f u e d f e amphenol miniature cylindrical insert arrangements ? front face of pin inserts illustrated insert arrangement 20-16 20-24 20-25 20-26 service rating ii i i i number of contacts 16 24 25 20 6 contact size 16 20 20 20 12 insert arrangement 20-27 20-39 20-41 20-70 service rating i i i coax number of contacts 27 37 2 41 10 4 contact size 20 20 16 20 20 8 coax insert arrangement 20-90 22-7 22-21 22-25 service rating hi-voltage coax ii i number of contacts 7 7 21 25 contact size 20 8 coax 16 16 insert arrangement 22-32 22-34 22-36 22-41 service rating i i i i number of contacts 32 34 36 27 14 contact size 20 20 20 20 16 a z y x w v u t s r p n m l k j h g f e d c b a l k j h g f e d c b a t s b v u r c f w p d m h g e x n e n l j d m l k j a c b z y h g f k a z y x w v u t s r p n m l k j h g f e d c b a t s r q p n m k j i h g f e d c b a b c d e f g h j k l m n p r s t u v w x y z a b c
11 a z y x w v u t s r p n m l k j h g f e d c b a x w v u t s r q p n m y k j i h g f e d c b z hh gg ff ee dd cc bb aa a g f e d c b hj a g f e d c b a g f e d c b a x w v u t s r q p y n m l k j h gf e d c b z a g f e d c b a z y x w v u t s r p n m l k j h g f e d c b a z y x w v u t s r p n m q k j i h g f e d c b aa pp nn mm ll kk jj hh gg ff ee dd cc bb a e c b d d f e g f i g h j m p n q r aa bb b x t y z y a w v u t s r p n m l k j h z w k v x s u c amphenol miniature cylindrical insert arrangements ? front face of pin inserts illustrated insert arrangement 22-55 22-70 22-71 22-72 service rating i i, coax i, coax n/a number of contacts 55 13 6 2 7 12 4 3 contact size 20 20 8 coax 20 8 coax 20 16 8 coax insert arrangement 22-78 22-96 24-31 24-51 service rating coax ii i i number of contacts 7 7 31 47 4 contact size 8 coax 12 for 16 20 12 coax # 10 wire insert arrangement 24-61 24-71 24-79 service rating i n/a coax number of contacts 61 45 2 2 1 5 contact size 20 20 16 8 coax 20 8 coax contact legend symbol contact size 20 16 12 hv 12 coax 8 coax v kd t p b lc e h m j f g r s n a u a v f e n l t j hd m r g p s u c kb b c d e f g h k i j n p r s t u v w x y z a a b d e f j m h m n p q r y t l g bb dd cc aa u c v z s x k w f a d e b c
12 wall mounting receptacle amphenol pt, sp, ms/pt proprietary/mil-c-26482, series 1 bayonet coupling and solder termination cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle thru bulkhead receptacle amphenol ? solder contact miniatur e cylindrical connectors meet the most critical application needs. design versatility combined with high reliability performance makes these series of miniature cylindrical connectors ideal for environ- mental sealing or pressurized applications. the ms/pt series is qualified to mil-c-26482, series 1 and has all the outstanding design characteristics and quality of the pt series. the sp series is a modification of the pt, providing special shells with a wide mounting flange for back panel mounting. a corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the pt and ms/pt. the sp is given a durable non-conductive hard anodic ?alumilite? ? coating which provides abrasion protection and resis- tance to corrosion. shell components for these series are aluminum. the dependable 5 key/keyway polarization with bayonet lock coupling assures pos- itive mating with no chance of cross plugging. spring tension pro- vided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. both the insert and main joint gasket are molded from resilient neoprene. this provides excellent moisture sealing at the gasket and superior electrical isolation of the contact in the insert. both pins and sockets are machined from a copper alloy and are gold plated. this gold plating eliminates contact corrosion and offers an indefinite shelf life. socket contacts for these series are a closed entry design. a breakaway style plug is available in the pt solder series. hermetics receptacles are available in pt and ms/ pt solder series. receptacles with printed circuit board contacts are also available. pt solder is ul recognized under file #e115497, vol. 1, sec. 5. the pt, sp and ms/pt series are intermateable and intermount- able with all existing miniature cylindrical series connectors except for the threaded coupling pc series. refer to pages 4-11 for insert arrangement availability. pt, sp, ms/pt contact data/connector ratings contact specifications contact size test current maximum millivolt drop? solder well diameter solder well depth 20 7.5 55 .046 .125 16 13.0 50 .078 .188 12 23.0 42 .116 .188 service rating service rating recommended operating ac voltage at sea level test voltage ac (rms), 60 cps sea level 50,000 ft. 70,000 ft. 110,000 ft. i 600 1,500 500 375 200 ii 1,000 2,300 750 500 200 ? silver plated wire per mil-c-26482 * this connector style is sometimes referred to as a cable connecting ?plug.? it does, however, mate with a straight or 90 degree plug. ? +.004 ?.000 +.031 ?.000 +.005 ?.003 +.031 ?.000 breakaway twist pull plug +.004 ?.002 +.031 ?.000
13 pt, sp service classes pt and sp connectors are available in the service classes listed below. each class, with the exception of hermetic, offers one or more means of terminating or supporting a cable or wire bundle. class ?w? is not available in the sp series. ?a? general duty; back shell is threaded for con- duit attachment of ms3057 cable clamp ?a? (sr) general duty, with strain relief clamp for cable or wire bundle support ?c? pressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a tempera- ture range of ?65f to +257f ?e? environmental resistant connectors - sup- plied with a multi-holed grommet and clamp- ing nut for moisture-proofing individual open wires ?e? (sr) environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ?j? same as ?w? class except with strain relief ?p? translucent nylon boot for retaining cus- tomer-applied potting compounds; held in place by a threaded ring ?p? (sr) strain relief clamp suitable for retaining cus- tomer applied potting compounds, with pro- vision for wire support ?w? compressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cables. telescoping sleeves (ms 3420a) can be used to adapt to cables smaller than minimum close-down. ?h?* hermetically sealed with compression glass inserts (see pages 22-25) style with printed circuit board contacts- see page 20. breakaway style - see page 26. ms/pt service classes the ms/pt miniature connector is available in the fol- lowing certified service classes: ?e? environmental resistant connectors - sup- plied with a multi-holed grommet and clamp- ing nut for moisture-proofing individual open wires ?f? grommet seal with strain relief clamp ?p? translucent nylon boot for retaining cus- tomer-applied potting compounds; held in place by a threaded ring ?a? general duty ?e? (sr), ms / ?f? strain relief ?e?, ms / ?e? open wire seal ?p?, ms / ?p? potting boot ?w? cable seal bayonet coupling with solder contacts pt, sp, ms/pt
14 nd l nd xl termination assemblies ?a? general duty/ ?c? pressurized? pt00a-xx-xxx sp00a-xx-xxx pt00c-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? strain relief pt00a-xx-xxx (sr) sp00a-xx-xxx (sr) pt00e-xx-xxx (sr) sp00e-xx-xxx (sr) pt00p-xx-xxx (sr) sp00p-xx-xxx (sr) ms3110f-xx-xxx ?e? open wire seal pt00e-xx-xxx sp00e-xx-xxx ms3110e-xx-xxx ?p? potting boot pt00p-xx-xxx sp00p-xx-xxx ms3110p-xx-xxx ?w? cable seal pt00w-xx-xxx ?j? cable seal pt00j-xx-xxx ms3110j-xx-xxx to complete part number see how to order on page 27. (mmc) located within .0025 of (tp) all dimensions for reference only. shell size receptacle front view receptacle side view class ?a?, ?c? r (tp) s max. a +.001 ?.005 k +.020 ?.010 l max. m +.010 ?.000 q thread class 2a z max. d min. l max. n max. v thread class a pt sp pt sp pt sp pt sp pt sp 6 .469 .641 .688 .953 .348 .493 .524 .906 .431 .462 .3125-32 nef .468 .438 .175 1.553 .462 .3750-32 nef 8 .594 .734 .812 1.047 .473 .493 .524 .906 .431 .462 .4375-28 unef .468 .438 .297 1.553 .590 .5000-28 unef 10 .719 .812 .938 1.125 .590 .493 .524 .906 .431 .462 .5625-24 nef .468 .438 .421 1.553 .717 .6250-24 nef 12 .812 .938 1.031 1.250 .750 .493 .524 .906 .431 .462 .6875-24 nef .468 .438 .546 1.553 .834 .7500-20 unef 14 .906 1.031 1.125 1.344 .875 .493 .524 .906 .431 .462 .8125-20 unef .468 .438 .663 1.553 .970 .8750-20 unef 16 .969 1.125 1.219 1.438 1.000 .493 .524 .906 .431 .462 .9375-20 unef .468 .438 .787 1.553 1.088 1.0000-20 unef 18 1.062 1.203 1.312 1.516 1.125 .493 .524 .906 .431 .462 1.0625-18 nef .531 .438 .879 1.553 1.216 1.1875-18 nef 20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.125 .556 .556 1.1875-18 nef .531 .531 1.014 1.703 1.332 1.1875-18 nef 22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.125 .556 .556 1.3125-18 nef .531 .531 1.134 1.703 1.460 1.4375-18 nef 24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.188 .589 .589 1.4375-18 nef .498 .498 1.259 1.765 1.585 1.4375-18 nef shell size class ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? class ?e?, ms / ?e? class ?p?, ms / ?p? class ?w?, ?j? c thread d min. g max. h max. l max. n max. l max. n max. d min. l max. n max. d l max. n max. xl max. closed free 6 ? ? ? ? ? ? 1.266 .440 .192 1.438 .484 ? ? ? ? ? 8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271 10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271 12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411 14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599 16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943 18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172 20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610 22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766 24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985 pt00 (ms3110) sp00 wall mounting receptacle nd v l .375 min g l c n dh l n n l d s s r (tp) r (tp) pt .120 .005 dia. (.147 .005 dia., size 24) sp .150 .005 dia. l q m a k z 4 holes
15 nd l nd xl s s y a k z m l q termination assemblies ?a? general duty pt01a-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? strain relief pt01a-xx-xxx (sr) pt01e-xx-xxx (sr) pt01p-xx-xxx (sr) ms3111f-xx-xxx ?e? open wire seal pt01e-xx-xxx ms3111e-xx-xxx ?p? potting boot pt01p-xx-xxx ms3111p-xx-xxx ?w? cable seal pt01w-xx-xxx ?j? cable seal pt01j-xx-xxx ms3111j-xx-xxx note: this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. to complete part number see how to order on page 27. all dimensions for reference only. shell size recept. front view receptacle side view class ?a?, s .020 y .020 a +.001 ?.005 k +.020 ?.010 l max. m +.016 ?.000 q thread class 2a z max. d min. l max. n max. v thread class a 6 .688 .812 .348 .494 .906 .400 .3125-32 nef .948 .175 1.553 .462 .3750-32 nef 8 .812 .938 .473 .494 .906 .400 .4375-28 unef .948 .297 1.553 .590 .5000-28 unef 10 .938 1.062 .590 .494 .906 .400 .5625-24 nef .948 .421 1.553 .717 .6250-24 nef 12 1.031 1.156 .750 .494 .906 .400 .6875-24 nef .948 .546 1.553 .834 .7500-20 unef 14 1.125 1.250 .875 .494 .906 .400 .8125-20 unef .948 .663 1.553 .970 .8750-20 unef 16 1.219 1.344 1.000 .494 .906 .400 .9375-20 unef .948 .787 1.553 1.088 1.0000-20 unef 18 1.312 1.438 1.125 .494 .906 .400 1.0625-18 nef .948 .879 1.553 1.216 1.1875-18 nef 20 1.438 1.562 1.250 .650 1.125 .535 1.1875-18 nef 1.166 1.041 1.703 1.332 1.1875-18 nef 22 1.562 1.688 1.375 .650 1.125 .535 1.3125-18 nef 1.166 1.135 1.703 1.460 1.4375-18 nef 24 1.688 1.812 1.500 .683 1.188 .568 1.4375-18 nef 1.166 1.259 1.765 1.585 1.4375-18 nef shell size class ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? class ?e?, ms / ?e? class ?p?, ms / ?p? class ?w?, ?j? c thread d min. g max. h max. l max. n max. l max. n max. d min. l max. n max. d l max. n max. xl max. closed free 6??????1.266.440.1921.438.484? ? ? ? ? 8 6-32 .240 .125 .812 1.922 .550 1.266 .560 .317 1.438 .608 .168 .230 1.705 .547 2.271 10 6-32 .302 .188 .875 1.922 .675 1.266 .685 .434 1.438 .734 .205 .312 1.705 .675 2.271 12 6-32 .428 .312 1.000 1.922 .803 1.266 .813 .548 1.438 .858 .338 .442 1.848 .812 2.411 14 6-32 .552 .375 1.125 1.922 .920 1.266 .930 .673 1.438 .984 .416 .539 2.040 .940 2.599 16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.438 1.110 .550 .616 2.256 1.067 2.943 18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.438 1.234 .600 .672 2.486 1.194 3.172 20 8-32 .740 .625 1.438 2.344 1.290 1.516 1.301 1.024 1.656 1.360 .635 .747 2.922 1.322 3.610 22 8-32 .928 .750 1.625 2.344 1.418 1.516 1.430 1.149 1.656 1.484 .670 .846 3.086 1.449 3.766 24 8-32 .990 .800 1.719 2.406 1.543 1.578 1.555 1.274 1.717 1.610 .740 .894 3.310 1.576 3.985 pt01 (ms3111) cable connecting receptacle nd .375 min v l g l c n dh l n n l d
16 pt02a-xx-xxx sp02a-xx-xxx * pt02c-xx-xxx * sp02c-xx-xxx * pt02e-xx-xxx * sp02e-xx-xxx ms3112e-xx-xxx * pt02p-xx-xxx * sp02p-xx-xxx ms3112p-xx-xxx * pt02w-xx-xxx * sp02w-xx-xxx to complete part number see how to order on page 27. (mmc) located within .0025 of (tp) * the pt02 and sp02 box mounting receptacles are made only to complete a series; no provision is made for accessories or potting on the rear skirt. all dimensions for reference only. shell size receptacle front view receptacle side view r (tp) s a +.001 ?.005 k +.020 ?.010 l max. m +.010 ?.000 n dia. max. z max. pt sp pt sp pt sp pt sp pt sp 6 .469 .641 .688 .953 .348 .493 .524 .825 .431 .462 .323 .465 .438 8 .594 .734 .812 1.047 .473 .493 .524 .825 .431 .462 .449 .465 .438 10 .719 .812 .938 1.125 .590 .493 .524 .825 .431 .462 .573 .465 .438 12 .812 .938 1.031 1.250 .750 .493 .524 .825 .431 .462 .699 .465 .438 14 .906 1.031 1.125 1.344 .875 .493 .524 .825 .431 .462 .823 .465 .438 16 .969 1.125 1.219 1.438 1.000 .493 .524 .825 .431 .462 .949 .465 .438 18 1.062 1.203 1.312 1.516 1.125 .493 .524 .825 .431 .462 1.073 .465 .438 20 1.156 1.297 1.438 1.672 1.250 .650 .650 1.076 .556 .556 1.199 .526 .531 22 1.250 1.375 1.562 1.750 1.375 .650 .650 1.076 .556 .556 1.323 .526 .531 24 1.375 1.500 1.688 1.875 1.500 .683 .683 1.109 .589 .589 1.449 .493 .497 pt02 (ms3112) sp02 box mounting receptacle s s r (tp) r (tp) pt .120 .005 dia. (.147 .005 dia., size 24) sp .150 .005 dia. an kz l m 4 holes
17 nd l nd xl termination assemblies ?a? general duty pt06a-xx-xxx sp06a-xx-xxx ptg06a-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? strain relief pt06a-xx-xxx (sr) sp06a-xx-xxx (sr) ptg06a-xx-xxx (sr) pt06e-xx-xxx (sr) sp06e-xx-xxx (sr) ptg06e-xx-xxx (sr) pt06p-xx-xxx (sr) sp06p-xx-xxx (sr) ptg06p-xx-xxx (sr) ms3116f-xx-xxx ?e? open wire seal pt06e-xx-xxx sp06e-xx-xxx ptg06e-xx-xxx ms3116e-xx-xxx ?p? potting boot pt06p-xx-xxx sp06p-xx-xxx ptg06p-xx-xxx ms3116p-xx-xxx ?w? cable seal pt06w-xx-xxx sp06w-xx-xxx ptg06w-xx-xxx ?j? cable seal pt06j-xx-xxx ms3116j-xx-xxx * available in pt06 only all dimensions for reference only. shell size plug front view plug side view class ?a? s max. j l max. q thread class 2a z max. d min. l max. n max. v thread class a 6 .625 .353 .906 .3125-32 nef .594 .175 1.609 .462 .3750-32 nef 8 .750 .353 .906 .4375-28 unef .594 .297 1.609 .590 .5000-28 unef 10 .859 .353 .906 .5625-24 nef .594 .421 1.609 .717 .6250-24 nef 12 1.013 .353 .906 .6875-24 nef .594 .546 1.609 .834 .7500-20 unef 14 1.156 .353 .906 .8125-20 unef .594 .663 1.609 .970 .8750-20 unef 16 1.281 .353 .906 .9375-20 unef .594 .787 1.609 1.088 1.0000-20 unef 18 1.319 .353 .906 1.0625-18 nef .594 .879 1.609 1.216 1.1875-18 nef 20 1.531 .415 1.062 1.1875-18 nef .672 1.014 1.656 1.332 1.1875-18 nef 22 1.656 .415 1.062 1.3125-18 nef .672 1.135 1.656 1.460 1.4375-18 nef 24* 1.776 .415 1.125 1.4375-18 nef .672 1.259 1.750 1.587 1.4375-18 nef shell size class ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? class ?e?, ms / ?e? class ?p?, ms / ?p? class ?w?, ?j? c thread d min. g .010 h max. l max. n max. l max. n max. d min. l max. n max. d l max. n max. xl max. closed free 6 ? ? ? ? ? ? 1.266 .440 .192 1.526 .484 ? ? ? ? ? 8 6-32 .240 .125 .812 1.906 .550 1.266 .560 .317 1.526 .608 .168 .230 1.705 .547 2.271 10 6-32 .302 .188 .875 1.906 .675 1.266 .685 .434 1.526 .734 .205 .312 1.705 .675 2.271 12 6-32 .428 .312 1.000 1.906 .803 1.266 .813 .548 1.526 .858 .338 .442 1.848 .812 2.411 14 6-32 .552 .375 1.125 1.906 .920 1.266 .930 .673 1.526 .984 .416 .539 2.040 .940 2.599 16 6-32 .615 .500 1.188 2.047 1.047 1.266 1.057 .798 1.526 1.110 .550 .616 2.256 1.067 2.943 18 8-32 .740 .625 1.438 2.078 1.165 1.266 1.175 .899 1.526 1.234 .600 .672 2.486 1.194 3.172 20 8-32 .740 .625 1.438 2.250 1.290 1.438 1.301 1.024 1.546 1.360 .635 .747 2.844 1.322 3.610 22 8-32 .928 .750 1.625 2.250 1.418 1.438 1.430 1.149 1.546 1.484 .670 .846 3.000 1.449 3.766 24* 8-32 .990 .800 1.750 2.312 1.543 1.500 1.555 1.274 1.656 1.610 .740 .894 3.210 1.576 3.985 pt06 (ms3116) sp06 straight plug to complete part number see how to order on page 27. s l zq j nd .375 min v l g l c n dh l n n l d
18 termination assemblies ?e? open wire seal pt07e-xx-xxx sp07e-xx-xxx ms3114e-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr), ms / ?f? strain relief pt07a-xx-xxx (sr) sp07a-xx-xxx (sr) pt07e-xx-xxx (sr) ms3114f-xx-xxx ?p? potting boot pt07p-xx-xxx ms3114p-xx-xxx * size 24 strain relief available in pt only. all dimensions for reference only. shell size recept. front view receptacle side view class ?e?, ms / ?e? h .016 s a dia. +.001 ?.005 j flat +.000 ?.010 k +.011 ?.010 m p panel thickness r thread class 2a unef z l max. m n max. z .040 min. max. 6 .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 .231 .568 .696 .604 .191 8 .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 .231 .568 .696 .729 .191 10 .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 .231 .568 .696 .854 .191 12 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 .231 .568 .696 .979 .191 14 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 .231 .568 .696 1.104 .191 16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 .231 .568 .696 1.229 .191 18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 .231 .568 .696 1.354 .191 20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 .261 .630 .884 1.510 .221 22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 .261 .630 .884 1.635 .221 24 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 .228 .660 .917 1.760 .188 shell size class ?a? (sr), ?p? (sr), ms / ?f? class ?e? (sr) class ?p?, ms / ?p? c thread d max. g h l m c thread d max. g h l m d max. l +.010 ?.026 m n z 6???????? ????.202.593.696.484.191 8 6-32 .250 .125 .781 1.062 .696 6-32 .250 .125 .775 1.029 .696 .327 .593 .696 .608 .191 10 6-32 .312 .188 .844 1.062 .696 6-32 .312 .188 .837 1.029 .696 .444 .593 .696 .734 .191 12 6-32 .438 .312 .969 1.062 .696 6-32 .438 .312 .963 1.029 .696 .558 .593 .696 .858 .191 14 6-32 .562 .375 1.094 1.062 .696 6-32 .562 .375 1.087 1.029 .696 .683 .593 .696 .984 .191 16 6-32 .625 .500 1.156 1.188 .696 6-32 .625 .500 1.150 1.161 .696 .808 .593 .696 1.110 .191 18 8-32 .750 .625 1.406 1.188 .696 8-32 .750 .625 1.400 1.161 .696 .909 .593 .696 1.234 .191 20 8-32 .750 .625 1.406 1.250 .884 8-32 .750 .625 1.400 1.224 .884 1.034 .718 .884 1.360 .221 22 8-32 .938 .750 1.594 1.250 .884 8-32 .938 .750 1.587 1.224 .884 1.159 .718 .884 1.484 .221 24* 8-32 1.000 .800 1.594 1.250 .917 8-32 1.000 .800 1.681 1.320 .917 1.284 .718 .917 1.610 .188 pt07 (ms3114) sp07 jam nut receptacle to complete part number see how to order on page 27. ?a? general duty/ ?c? pressurized receptacle pt07a-xx-xxx pt07c-xx-xxx s h s j a m z r p k j n a mz r pl j a mz c r pl gd h j a mz r pl dn
19 d c b e l a h k l termination assemblies ?e? open wire seal, ?e? (sr) strain relief ?p? potting boot 75 degrees pt08e-xx-xxx sp08e-xx-xxx pt08e-xx-xxx (sr) sp08e-xx-xxx (sr) pt08p-xx-xxx sp08p-xx-xxx to complete part number see how to order on page 27. all lockwire holes are .044 dia. min. all dimensions for reference only. shell size plug front view plug side view g dia. max. class ?e?, ?e? (sr) class ?p? b .031 c +.010 ?.025 d .062 e +.047 ?.025 l .057 a .025 h .015 k .015 l max. 8 .796 .655 .169 .941 .339 1.786 .469 .312 .438 1.656 10 .921 .749 .170 1.191 .393 1.880 .547 .438 .562 1.781 12 1.046 .812 .264 1.191 .450 1.965 .625 .516 .688 1.843 14 1.171 .905 .310 1.254 .519 2.113 .734 .625 .781 1.953 16 1.297 1.030 .330 1.316 .583 2.315 .750 .656 .890 2.000 18 1.422 1.015 .444 1.562 .621 2.423 .781 .703 1.000 2.046 20 1.562 1.077 .510 1.625 .683 2.695 .859 .766 1.125 2.218 22 1.672 1.139 .515 1.719 .739 2.742 .906 .812 1.234 2.265 24 1.797 1.265 .656 1.751 .797 2.980 1.169 .918 1.374 2.624 pt08 e sp08 e 90 degree plug g
20 all dimensions for reference only. shell size part number* pt07 with pcb contacts receptacle front view receptacle side view h +.017 ?.016 s .010 a dia. +.001 ?.005 j flat +.000 ?.010 k +.011 ?.010 m .010 p panel thickness r thread class 2a z +.025 ?.035 min. max. 6 71-533720-xxx .625 .812 .348 .405 .125 .696 .062 .125 .4375-28 unef .376 8 71-533721-xxx .750 .938 .473 .530 .125 .696 .062 .125 .5625-24 unef .376 10 71-533722-xxx .875 1.062 .590 .655 .125 .696 .062 .125 .6875-24 unef .376 12 71-533723-xxx 1.062 1.250 .750 .818 .125 .696 .062 .125 .8750-20 unef .376 14 71-533724-xxx 1.188 1.375 .875 .942 .125 .696 .062 .125 1.0000-20 unef .376 16 71-533725-xxx 1.312 1.500 1.000 1.066 .125 .696 .062 .125 1.1250-18 unef .376 18 71-533726-xxx 1.438 1.625 1.125 1.191 .125 .696 .062 .125 1.2500-18 unef .376 20 71-533727-xxx 1.562 1.812 1.250 1.316 .156 .884 .062 .250 1.3750-18 unef .367 22 71-533728-xxx 1.688 1.938 1.375 1.441 .156 .884 .062 .250 1.5000-18 unef .367 24 71-533729-xxx 1.816 2.062 1.500 1.566 .156 .917 .062 .250 1.6250-18 unef .334 * for rohs compliance connectors with pcb contacts change ?71?- to: ?58? designates conductive black zinc cobalt plating ?93? designates non-conductive black zinc cobalt plating pt connectors with printed circuit board contacts all dimensions for reference only. shell size part number* pt02 with pcb contacts receptacle front view receptacle side view r (tp) s +.011 ?.010 a +.001 ?.005 k +.021 ?.010 l max. m +.010 ?.000 n dia. max. z +.040 ?.050 6 71-570120-xxx .469 .688 .348 .493 .825 .431 .323 .380 8 71-570121-xxx .594 .812 .473 .493 .825 .431 .449 .380 10 71-570122-xxx .719 .938 .590 .493 .825 .431 .573 .380 12 71-570123-xxx .812 1.031 .750 .493 .825 .431 .699 .380 14 71-570124-xxx .906 1.125 .875 .493 .825 .431 .823 .380 16 71-570125-xxx .969 1.219 1.000 .493 .825 .431 .949 .380 18 71-570126-xxx 1.062 1.312 1.125 .493 .825 .431 1.073 .380 20 71-570127-xxx 1.156 1.438 1.250 .650 1.076 .556 1.199 .286 22 71-570128-xxx 1.250 1.562 1.375 .650 1.076 .556 1.323 .286 24 71-570129-xxx 1.375 1.688 1.500 .683 1.109 .589 1.449 .253 jam nut receptacle (pt07) with pcb contacts all lockwire holes are .044 dia. min. order by applicable part number in chart below; add insert arrangement number. refer to insert availability on pages 4-11. box mounting receptacle (pt02) with pcb contacts order by applicable part number in chart below; add insert arrangement number. refer to insert availability on pages 4-11. (mmc) located within .0025 of (tp) s s r (tp) r (tp) .120 .005 dia. (.147 .005 dia., size 24) 4 holes an k z l m .030 .001 s h s j a mz r p k .030 .001
21 * ptb-xx-xxx * spb-xx-xxx * to complete part number add desired arrangement number (refer to pages 4 and 5 for insert availability) and add ?ps?; example: ptb-18-32ps. if a rotation is required, use ptb-18-32ps and add w, x, y or z. example: ptb-18-32 psw. the socket end of the insert always appears at the ?p? dimension end of shell. (mmc) located within .0025 of (tp) all dimensions for reference only. shell size receptacle front view receptacle side view r (tp) s a +.001 ?.005 k +.016 ?.000 l .005 m +.010 ?.000 p max. ptb spb ptb spb ptb spb 6 .469 .641 .688 .953 .348 .625 1.050 .562 .125 .188 8 .594 .734 .812 1.047 .473 .625 1.050 .562 .125 .188 10 .719 .812 .938 1.125 .590 .625 1.050 .562 .125 .188 12 .812 .938 1.031 1.250 .750 .625 1.050 .562 .125 .188 14 .906 1.031 1.125 1.344 .875 .625 1.050 .562 .125 .188 16 .969 1.125 1.219 1.438 1.000 .625 1.050 .562 .125 .188 18 1.062 1.203 1.312 1.516 1.125 .625 1.050 .562 .125 .188 20 1.156 1.297 1.438 1.672 1.250 .781 1.330 .688 .125 .312 22 1.250 1.375 1.562 1.750 1.375 .781 1.330 .688 .125 .312 24 1.375 1.500 1.688 1.875 1.500 .781 1.330 .688 .125 .312 ptb spb thru bulkhead receptacle s s r (tp) r (tp) ptb .120 .005 dia. (.147 .005 dia., size 24) spb .150 .005 dia. l m p a a k 4 holes
22 solder mounting receptacle box mounting receptacle jam nut receptacle three shell styles are available in the hermetic pt bayonet series: ?pt i h (ms3113h) ?pt02h ? pt07h (ms3114h) these hermetic connectors are only available with solder cup or flat eyelet pin contacts in the ms/pt version. socket contacts are available in some proprietary pt versions. other design characteristics of the pt hermetic connector series are as fol- lows: shell sizes: 8 through 24 (tin plated) contact count: 2 through 61. refer to pages 4 and 5 for insert availability for hermetics. current: 5.0 amp each #20 contact 10 amp each #16 contact 17 amp each #12 contact contacts are tin plated for pt; gold is optional dielectric withstanding voltage (sea level): 1500 volts (rms) 60 cps, service rating i 2300 volts (rms) 60 cps, service rating ii compression glass inserts, permanently lettered helium leakage: less than 1.0 x 10 -6 cc/sec. at 15 psi differential physical shock: 100 g?s vibration: exceeds mil-e-5272 procedure ii thermal shock: no deterioration or failure after 5 cycles at ?55f to +257f intermateability: mates with ms3116 and pt06 refer to pages 4-11 for insert arrangement availability. pt hermetic
23 *pt i h-xx-xxx ** pt i y-xx-xxx ** ms3113h-xxcxxx ?pt i h-xx-xxx (100) ?? pt i y-xx-xxx (100) ?? ms3113h-xxyxxx all dimensions for reference only. shell size recept. front view receptacle side view g dia. max. a dia. +.001 ?.005 l +.025 ?.016 n dia. +.001 ?.005 w +.011 ?.010 z max. 6 .511 .348 .447 .438 .094 .386 8 .636 .473 .447 .562 .094 .386 10 .761 .590 .447 .672 .094 .386 12 .855 .750 .447 .781 .094 .386 14 .980 .875 .447 .906 .094 .386 16 1.105 1.000 .447 1.031 .094 .386 18 1.229 1.125 .447 1.156 .094 .386 20 1.323 1.250 .509 1.250 .094 .386 22 1.449 1.375 .509 1.375 .125 .418 24 1.574 1.500 .542 1.500 .125 .418 pt i h (ms3113h) hermetic solder mounting receptacle to complete part number see how to order on page 27. * solder cup pin contacts without interfacial seal ** solder cup pin contacts with interfacial seal ? flat eyelet pin contacts without interfacial seal ?? flat eyelet pin contacts with interfacial seal g an w l z .031 +.006 ?.005
24 * pt02h-xx-xxx ** pt02y-xx-xxx ? pt02h-xx-xxx (100) ?? pt02y-xx-xxx (100) all dimensions for reference only. shell size receptacle front view receptacle side view r (tp) s .016 a dia. +.001 ?.005 k .015 l +.025 ?.015 n dia. +.001 ?.005 u +.011 ?.010 z max. 6 .469 .688 .348 .047 .494 .438 .062 .344 8 .594 .812 .473 .047 .494 .562 .062 .344 10 .719 .938 .590 .047 .494 .672 .062 .344 12 .812 1.031 .750 .047 .494 .781 .062 .344 14 .906 1.125 .875 .047 .494 .906 .062 .344 16 .969 1.219 1.000 .047 .494 1.031 .062 .344 18 1.062 1.312 1.125 .047 .494 1.156 .062 .344 20 1.156 1.438 1.250 .047 .556 1.250 .062 .344 22 1.250 1.562 1.375 .079 .556 1.375 .062 .377 24 1.375 1.688 1.500 .079 .588 1.500 .062 .377 pt02h hermetic box mounting receptacle to complete part number see how to order on page 27. * solder cup pin contacts without interfacial seal ** solder cup pin contacts with interfacial seal ? flat eyelet pin contacts without interfacial seal ?? flat eyelet pin contacts with interfacial seal (mmc) located within .0025 of (tp) s s r (tp) r (tp) pt .120 .005 dia. (.147 .005 dia., size 24) sp .150 .005 dia. an w l z u 4 holes
25 * pt07h-xx-xxx ** pt07y-xx-xxx ** ms3114h-xxcxxx ? pt07h-xx-xxx (100) ?? pt07y-xx-xxx (100) ?? ms3114h-xxyxxx all dimensions for reference only. shell size receptacle front view receptacle side view s +.016 h hex +.017 ?.016 a +.001 ?.005 k +.043 ?.016 m +.031 ?.000 p panel thickness r thread class 2a z max. max. min. 6 .812 .625 .348 .094 .696 .125 .062 .4375-28 unef .206 8 .938 .750 .473 .094 .696 .125 .062 .5625-24 nef .206 10 1.062 .875 .590 .094 .696 .125 .062 .6875-24 nef .206 12 1.250 1.062 .750 .094 .696 .125 .062 .8750-20 unef .206 14 1.375 1.188 .875 .094 .696 .125 .062 1.0000-20 unef .206 16 1.500 1.312 1.000 .094 .696 .125 .062 1.1250-18 nef .206 18 1.625 1.438 1.125 .094 .696 .125 .062 1.2500-18 nef .206 20 1.812 1.562 1.250 .125 .884 .250 .062 1.3750-18 nef .081 22 1.938 1.688 1.375 .125 .884 .250 .062 1.5000-18 nef .081 24 2.062 1.812 1.500 .125 .917 .250 .062 1.6250-18 nef .048 pt07h (ms3114h) hermetic jam nut receptacle to complete part number see how to order on page 27. * solder cup pin contacts without interfacial seal ** solder cup pin contacts with interfacial seal ? flat eyelet pin contacts without interfacial seal ?? flat eyelet pin contacts with interfacial seal s h s a mz r p k
26 breakaway plug with pt solder contacts, potted termination 71-3048xx-( ) 72-3048xx-( ) pt breakaway twist pull plug all dimensions for reference only. * see finish information below to determine prefix 71 or 72 in part number. drawing above shows standard lanyard length. part number* shell size a dia. max. b max. h .016 j .010 l max. 71-304808 8 .875 .984 .327 .353 1.937 71-304810 10 1.125 1.125 .444 .353 1.890 71-304812 12 1.281 1.406 .558 .353 1.906 71-304814 14 1.438 1.562 .683 .353 1.953 71-304816 16 1.562 1.688 .808 .353 2.000 71-304818 18 1.718 1.844 .909 .353 2.031 71-304820 20 1.875 2.000 1.034 .415 2.234 71-304822 22 2.031 2.188 1.159 .415 2.328 71-304824 24 2.156 2.312 1.284 .415 2.359 order by amphenol propriety number as follows (example part number shown): 71 - 3048 18 - 32 p 12 3 4 1. finish ?71?designates corrosion resistant olive drab cadmium plate ?72? designates anodic coated (electrically nonconductive -anodic) finish providing extreme wear and corrosion resistance, 500 hour extended salt spray. 2. connector type identification 3048 designates pt plug, solder, potted termination style 3. shell size and insert arrangement number see insert arrangement availability for miniature breakaw ay connectors on page 6. the numbers in the insert arrangement are hyphenated. the number preceding the hyphen is the shell size. the number following the hyphen is the insert arrangement number. 4. contact type/alternate insert rotation p designates pin, s designates socket for normal positioning of inserts. when an alternate position of the insert is required to prevent cross-mating a different letter (other than p or s) is used. see page 7 for description of alternate positions; then convert to amphenol proprietary coding by the chart at right to complete the part number. the pt miniature breakaway connector has the follow- ing design features: ? solder contacts, potted termination ? instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated ? intermateable with standard receptacles ? operating voltage to 900 vac (rms) at sea level ? same quick positive bayonet coupling and 5 key/ keyway polarization as other pt styles pin contacts socket contacts amphenol letter equates to ms letter amphenol letter equates to ms letter gpwhsw ipxjsx kpylsy mpznsz . 3 2 8 pin in s ert lanyard pulled taut again s t a .200 .0 3 1 dia mandrel .016 4.500 j h s ocket in s ert +.010 ?.025 .250 +.010 ?.025 l b a
27 pt, sp to more easily illustrate ordering proc edure, part number pt00a-20-41pw(sr) is shown as follows: pt 00 a - 20 - 41 p w (sr) 1 2345678 see code below: 1. connector type ?pt? designates standard o live drab, electrically conductive cadmium plate bayonet lock connector with solder contacts ?sp? designates electrically non-c onductive, hard anodic coated bayonet lock connector with solder contacts and la rger flange and mounting holes for back panel mounting ?ptg? designates plug with grounding fingers 2. shell style ?00? designates wall mounting receptacle ?01? designates cable connecting receptacle** ?02? designates box mounting receptacle ?06? designates straight plug ?07? designates jam nut receptacle ?08? designates 90 degree plug cable support ?b? designates thru bulkhead receptacle (pressurized) ? i ? designates solder mount receptacle (hermetic only) 3. service classes ?a? designates general duty back shell ?c? designates pressurized receptacle ?e? designates environmental resisti ng open wire seal with grommet and nut ?j? designates clamp assembly for mois ture proofing multi-jacketed cables, with strain relief ?p? designates assembly with potting boot w? designates clamp assembly for mois ture proofing multi-jacketed cables ?h? designates hermetic* without interfacial seal ?y? designates hermetic* with interfacial seal 4. shell size ?20? designates shell size. s hell sizes 6 through 24 available. 5. insert arrangement - refer to pages 4-11 for insert availability. ?20 - 41? designates insert arrangemen t. (the number following the hyphen is the number only that is used in the part number). 6. contacts ?p? designates pin contacts ?s? designates socket contacts for ordering connectors with printed circuit board contacts, see pg. 20. 7. insert rotation - refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in its shell from ?normal position. no letter required for normal (no rotation) position. 8. ?sr? designates a strain relief clamp. indicate optional finishes as follows: (003) olive drab cadmium plate (standard on ?pt?) (005) anodic coating - alumilite ? (standard on ?sp?) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief (100) suffix added for flat eyelet pin contacts in hermetic versions or rohs compliant finish suffix as follow: (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (470) non-conductive black zinc cobalt plating with strain relief (476) conductive black zinc cobalt plating with strain relief ms/pt mil-c-26482, series 1 part number ms3110e20-41pw is shown as follows: ms 311 0 e 20 - 41 p w 1 2345678 for hermetic connectors part number ms3113h20y41pw is shown as follows: ms 311 3 h 20 y 41 p w 1 234 5, 6 78 see code below: 1. ?ms? designates military standard 2. specification number ?311? designates basic family number for mil-c- 26482, series 1 solder type 3. shell style ?0? designates wall mounting receptacle ?1? designates cable connecting receptacle** ?2? designates box mounting receptacle ?3? designates solder mount receptacle (hermetic only) ?4? designates jam nut receptacle ?6? designates straight plug 4. service class ?e? designates environmental resisting connector ?f? designates environmental resisting connectors with strain relief ?j? designates clamp assembly for moisture proofing multi-jacketed cables, with strain relief ?p? designates potted type with potting boot ?h? designates hermetic 5. shell size ?20? designates shell size. shell sizes 8 through 24 available. 6. insert arrangement - refer to pages 4-11 for insert availability. ?20 - 41? designates arrangement. (the number fol- lowing the hyphen is the number only that is used in the part number). hermetic version ?20y41? designates insert arrangement; specify ?y? for flat eyelet pin contacts, or ?c? for solder cup pin contacts 7. contact configuration ?p? designates pin contacts ?s? designates socket contacts 8. insert rotation- refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in it shell from ?normal? position. no letter require fo nor- mal (no rotation) position. * hermetic connectors are supplied with tin plated shells. ** this connector style is sometimes referred to as a cable connect- ing ?plug?. it does, however, mate with either a straight or 90 degree plug. for ordering miniature breakaway pt solder connec- tors see pg. 26. pt, sp, ms/pt how to order r o h s a m p h e n o l e u / 2 0 0 2 / 9 5 / e c how to order pt, sp, ms/pt
28 wall mounting receptacle amphenol pt-se, sp-se, ms/pt-se proprietary/mil-c-26482, series 1 bayonet coupling and crimp termination cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle breakaway twist pull plug amphenol ? se crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. these crimp contacts are rear insertable/front release and are held in position by an ms approved spring tower reten- tion system. the ms/pt-se series is qualified to mil-c-26482, series 1 and has all the outstanding design characteristics and quality of the pt series. the sp-se series is a modification of the pt-se, providing special shells with a wide mounting flange for back panel mounting. a corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the pt-se and ms/pt-se. the sp-se is given a durable non-con- ductive hard anodic ?alumilite? ? coating which provides abra- sion protection and resistance to corrosion. shell components for these series are aluminum. the depend- able 5 key/keyway polarization with bayonet lock coupling assures positive mating with no chance of cross plugging. spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. both the insert and main joint gasket are molded from resilient neoprene. this provides excellent moisture sealing at the gas- ket and superior electrical isolation of the contact in the insert. both pins and sockets are machined from a copper alloy and are gold plated. this gold plating eliminates contact corrosion and offers an indefinite shelf life. socket contacts for these series are a closed entry design. breakaway style plug is available in pt-se crimp. the pt-se, sp-se and ms/pt-se series are intermateable and intermountable with all existing miniature cylindrical series connectors except for the threaded coupling pc series. refer to pages 4-11 for insert arrangement availability. * this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. ?
29 pt-se. sp-se, ms/pt-se ? silver plated wire per mil-c-26482 pt-se and sp-se service classes pt-se and sp-se connectors are available in the three service classes listed below. ?se? open wire sealing - environmental resistant, with a nut and grommet for moisture proof- ing individual wires ?se? (sr)strain relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ?sp? translucent nylon boot for retaining cus- tomer applied potting compounds; held in place by a threaded ring breakaway style - see page 38. ms/pt-se service classes ms-se series connectors are available in the following certified service classes: ?e? open wire sealing - environmental resisting connectors are supplied with a multi-hole grommet and clamping nut for moisture proofing individual open wires ?f? environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ?p? potting applications - these connectors are supplied with a translucent nylon boot for retention of customer applied potting com- pound contact specifications contact size test current maximum millivolt drop? crimp well diameter minimum well depth 20 7.5 55 .049 .001 .267 16 13.0 49 .067 .001 .236 12 23.0 42 .100 .002 .236 service rating service rating recommended operating ac voltage at sea level test voltage ac (rms), 60 cps sea level 50,000 ft. 70,000 ft. 110,000 ft. i 600 1,500 500 375 200 ii 1,000 2,300 750 500 200 ?se?, ms / ?e? open wire seal ?se? (sr), ms / ?f? strain relief clamp ?sp?, ms / ?p? potting boot bayonet coupling with crimp contacts pt-se, sp-se, ms/pt-se
30 termination assemblies ?se? open wire seal pt00se-xx-xxx sp00se-xx-xxx ms3120e-xx-xxx ?se? (sr), ms / ?f? strain relief pt00se-xx-xxx (sr) sp00se-xx-xxx (sr) ms3120f-xx-xxx ?sp? potting boot pt00sp-xx-xxx sp00sp-xx-xxx * back panel mounting all dimensions for reference only. shell size receptacle front view receptacle side view r (tp) s max. t dia. .005 a dia. +.001 ?.005 k .016 m +.010 ?.000 p* max. panel thickness pt sp pt sp pt sp pt sp pt sp 8 .594 ? .828 ? .120 ? .473 .062 .431 ? .094 ? 10 .719 .812 .954 1.141 .120 .150 .590 .062 .431 .462 .094 .125 12 .812 .938 1.047 1.266 .120 .150 .750 .062 .431 .462 .094 .125 14 .906 1.031 1.141 1.360 .120 .150 .875 .062 .431 .462 .094 .125 16 .969 1.125 1.234 1.453 .120 .150 1.000 .062 .431 .462 .094 .125 18 1.062 1.203 1.328 1.532 .120 .150 1.125 .062 .431 .462 .094 .125 20 1.156 1.297 1.453 1.688 .120 .150 1.250 .094 .556 .556 .219 .219 22 1.250 1.375 1.578 1.766 .120 .150 1.375 .094 .556 .556 .219 .219 24 1.375 1.500 1.703 1.891 .147 .150 1.500 .094 .589 .589 .219 .219 shell size class ?se?, ms / ?e? class ?se? (sr), ms / ?f? class ?sp?, ms / ?p? l max. n dia. max g dia. l max. n max. d dia. max. l max. n dia. max. 8 1.328 .560 .125 2.422 .781 ? ? ? 10 1.328 .704 .188 2.422 .844 .444 1.656 .734 12 1.328 .825 .312 2.422 .969 .558 1.656 .858 14 1.328 .954 .375 2.422 1.094 .683 1.656 .984 16 1.328 1.080 .500 2.537 1.156 .808 1.656 1.110 18 1.328 1.204 .625 2.537 1.406 .909 1.656 1.234 20 1.359 1.330 .625 2.824 1.406 1.034 1.750 1.360 22 1.359 1.454 .750 2.824 1.594 1.159 1.750 1.484 24 1.422 1.580 .800 2.900 1.688 1.284 1.782 1.610 pt00 se (ms3120) sp00 se wall mounting receptacle to complete part number see how to order on page 39. (mmc) located within .005 of (tp) s s r (tp) r (tp) t dia. 4 holes a mk n l agn k m l ad l k m n
31 termination assemblies ms / ?e? open wire seal mf00se-xx-xxx ms3128e-xx-xxx ms / ?f? strain relief mf00se-xx-xxx (sr) ms3128f-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view rr 1 s max. t dia. .005 t 1 dia. .005 a dia. +.001 ?.005 k .016 m +.010 ?.000 class ms / ?e? class ms / ?f? l max. n max. f min. g dia. l max. n max. 10 .719 .812 1.141 .120 .150 .590 .062 .462 1.328 .685 .297 .188 1.906 .891 12 .812 .938 1.266 .120 .150 .750 .062 .462 1.328 .813 .422 .312 1.906 1.016 14 .906 1.031 1.360 .120 .150 .875 .062 .462 1.328 .930 .547 .375 1.906 1.141 16 .969 1.125 1.453 .120 .150 1.000 .062 .462 1.328 1.057 .609 .500 2.000 1.203 18 1.062 1.203 1.532 .120 .150 1.125 .062 .462 1.328 1.175 .734 .625 2.000 1.469 20 1.156 1.297 1.688 .120 .150 1.250 .094 .556 1.359 1.301 .734 .625 2.172 1.469 22 1.250 1.375 1.766 .120 .150 1.375 .094 .556 1.359 1.428 .922 .750 2.172 1.656 24 1.375 1.500 1.891 .147 .150 1.500 .094 .589 1.422 1.533 .984 .800 2.234 1.750 mf00 se (ms3128) wall mounting receptacle to complete part number see how to order on page 39. (mmc) located within .0025 of (tp) s s r (tp) r1 (tp) r (tp) r1 (tp) t dia. 4 holes t1 dia. 4 holes mk n a l agfn k m l
32 termination assemblies ?se?, ms / ?e? open wire seal pt01se-xx-xxx sp01se-xx-xxx ms3121e-xx-xxx ?se? (sr), ms / ?f? strain relief pt01se-xx-xxx (sr) sp01se-xx-xxx (sr) ms3121f-xx-xxx ?sp?, ms / ?p? potting boot pt01sp-xx-xxx sp01sp-xx-xxx ms3121p-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view s max. class ?se?, ms / ?e? class ?se? (sr), ms / ?f? class ?sp?, ms / ?p? a dia. +.001 ?.005 k .018 l max. n dia. max. g dia. l max. n max. d dia. l max. n dia. max. 8 .812 .473 .094 1.522 .560 .125 2.422 .828 ? ? ? 10 .955 .590 .094 1.522 .685 .188 2.422 .891 .444 1.656 .734 12 1.048 .750 .094 1.522 .813 .312 2.422 1.016 .558 1.656 .858 14 1.142 .875 .094 1.522 .930 .375 2.422 1.141 .683 1.656 .984 16 1.236 1.000 .094 1.522 1.057 .500 2.537 1.203 .808 1.656 1.110 18 1.329 1.125 .094 1.522 1.175 .625 2.537 1.469 .909 1.656 1.234 20 1.455 1.250 .115 1.709 1.301 .625 2.824 1.469 1.034 1.750 1.360 22 1.579 1.375 .115 1.709 1.428 .750 2.824 1.656 1.159 1.750 1.484 24 1.709 1.500 .115 1.709 1.555 .800 2.900 1.750 1.284 1.782 1.610 pt01 se (ms3121) sp01 se cable connecting receptacle note: this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. to complete part number see how to order on page 39. s s k k n a l agn l a l d n k
33 pt02se-xx-xxx sp02se-xx-xxx ms3122e-xx-xxx to complete part number see how to order on page 39. (mmc) located within .0025 of (tp) all dimensions for reference only. shell size receptacle front view receptacle side view r s max. t dia. .005 a dia. +.001 ?.005 d max. k .016 l max. m +.010 ?.000 n dia. +.011 ?.000 pt sp pt sp pt sp pt sp pt sp 8 .594 ? .828 ? .120 ? .473 .312 ? .062 1.296 .431 ? .438 10 .719 .812 .954 1.141 .120 .150 .590 .312 .219 .062 1.296 .431 .462 .562 12 .812 .938 1.047 1.266 .120 .150 .750 .312 .219 .062 1.296 .431 .462 .688 14 .906 1.031 1.141 1.360 .120 .150 .875 .312 .219 .062 1.296 .431 .462 .812 16 .969 1.125 1.234 1.453 .120 .150 1.000 .312 .219 .062 1.296 .431 .462 .938 18 1.062 1.203 1.328 1.532 .120 .150 1.125 .312 .219 .062 1.296 .431 .462 1.062 20 1.156 1.297 1.453 1.688 .120 .150 1.250 .406 .344 .094 1.358 .556 .556 1.188 22 1.250 1.375 1.578 1.766 .120 .150 1.375 .406 .344 .094 1.358 .556 .556 1.312 24 1.375 1.500 1.703 1.891 .147 .150 1.500 .406 .344 .094 1.358 .589 .589 1.438 pt02 se (ms3122) sp02 se box mounting receptacle s s r (tp) r (tp) t dia. 4 holes l k m an d
34 mf02se-xx-xxx ms3127e-xx-xxx to complete part number see how to order on page 39. (mmc) located within .0025 of (tp) all dimensions for reference only. shell size receptacle front view receptacle side view n dia. +.011 ?.000 r r 1 s max. t .005 t 1 .005 a dia. +.001 ?.005 d max. k .016 l max. m +.010 ?.000 10 .562 .719 .812 1.141 .120 .150 .590 .219 .062 1.266 .462 12 .688 .812 .938 1.266 .120 .150 .750 .219 .062 1.266 .462 14 .812 .906 1.031 1.360 .120 .150 .875 .219 .062 1.266 .462 16 .938 .969 1.125 1.453 .120 .150 1.000 .219 .062 1.266 .462 18 1.062 1.062 1.203 1.532 .120 .150 1.125 .219 .062 1.266 .462 20 1.188 1.156 1.297 1.688 .120 .150 1.250 .344 .094 1.328 .556 22 1.312 1.250 1.375 1.766 .120 .150 1.375 .344 .094 1.328 .556 24 1.438 1.375 1.500 1.891 .147 .150 1.500 .344 .094 1.328 .589 mf02 se (ms3127) box mounting receptacle s s r (tp) r1 (tp) r (tp) r1 (tp) t dia. 4 holes l k m an d t1 dia. 4 holes
35 termination assemblies ?se?, ms / ?e? open wire seal pt06se-xx-xxx sp06se-xx-xxx ptg06se-xx-xxx ms3126e-xx-xxx ?se? (sr), ms / ?f? strain relief pt06se-xx-xxx (sr) sp06se-xx-xxx (sr) ptg06se-xx-xxx (sr) ms3126f-xx-xxx ?sp?, ms / ?p? potting boot pt06sp-xx-xxx sp06sp-xx-xxx ptg06sp-xx-xxx ms3126p-xx-xxx * pt-se, ms-se and ms-sp only. all dimensions for reference only. shell size plug front view plug side view s dia. max. z .045 z 1 .045 class ?se?, ms / ?e? class ?se? (sr), ms / ?f? class ?sp?, ms / ?p? l max. n max. g dia. l max. n max. d dia. l max. n dia. max. 8* .734 .640 .579 1.328 .540 .125 2.413 .828 .327 1.750 .578 10 .859 .640 .579 1.328 .685 .188 2.413 .891 .444 1.750 .734 12 1.031 .640 .579 1.328 .813 .312 2.413 1.016 .558 1.750 .858 14 1.156 .640 .579 1.328 .930 .375 2.413 1.141 .683 1.750 .984 16 1.281 .640 .579 1.328 1.057 .500 2.528 1.203 .808 1.750 1.110 18 1.391 .640 .579 1.328 1.175 .625 2.528 1.469 .909 1.750 1.234 20 1.531 .640 .579 1.297 1.301 .625 2.753 1.469 1.034 1.750 1.360 22 1.656 .640 .579 1.297 1.428 .750 2.753 1.656 1.159 1.750 1.484 24 1.777 .640 .579 1.359 1.533 .800 2.830 1.750 1.284 1.766 1.610 pt06 se (ms3126) sp06 se straight plug to complete part number see how to order on page 39. s l n z pin contacts z1 socket contacts l n d z pin contacts z1 socket contacts l n g z pin contacts z1 socket contacts
36 termination assemblies ?se?, ms / ?e? open wire seal pt07se-xx-xxx sp07se-xx-xxx ms3124e-xx-xxx ?se? (sr), ms / ?f? strain relief pt07se-xx-xxx (sr) sp07se-xx-xxx (sr) ms3124f-xx-xxx ?sp?, ms / ?p? potting boot pt07sp-xx-xxx sp07sp-xx-xxx ms3124p-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view h hex max. s max. a dia. +.001 ?.005 j flat +.000 ?.010 k +.011 ?.010 m .005 p panel thickness r thread class 2a min. max. 8 .767 .954 .473 .530 .125 .696 .062 .125 .5625-24 unef 10 .892 1.078 .590 .655 .125 .696 .062 .125 .6875-24 nef 12 1.079 1.266 .750 .818 .125 .696 .062 .125 .8750-20 unef 14 1.205 1.391 .875 .942 .125 .696 .062 .125 1.0000-20 unef 16 1.329 1.516 1.000 1.066 .125 .696 .062 .125 1.1250-18 nef 18 1.455 1.641 1.125 1.191 .125 .696 .062 .125 1.2500-18 nef 20 1.579 1.828 1.250 1.316 .156 .884 .062 .250 1.3750-18 nef 22 1.705 1.954 1.375 1.441 .156 .884 .062 .250 1.5000-18 nef 24 1.829 2.078 1.500 1.566 .156 .917 .062 .250 1.6250-18 nef shell size class ?se?, ms / ?e? class ?se? (sr), ms / ?f? class ?sp?, ms /?p? l max. n max. f min. g dia. free l max. n max. g dia. l max. n dia. max. 8 1.438 .749 .234 .125 1.922 .828 ? ? ? 10 1.438 .874 .297 .188 1.922 .891 .444 1.656 .734 12 1.438 .999 .422 .312 1.922 1.016 .558 1.656 .858 14 1.438 1.124 .547 .375 1.922 1.141 .683 1.656 .984 16 1.438 1.249 .609 .500 2.000 1.203 .808 1.656 1.110 18 1.438 1.374 .734 .625 2.000 1.469 .909 1.656 1.234 20 1.625 1.530 .734 .625 2.172 1.469 1.034 1.922 1.360 22 1.625 1.655 .922 .750 2.172 1.656 1.159 1.922 1.484 24 1.688 1.780 .984 .800 2.234 1.750 1.284 1.951 1.610 pt07 se (ms3124) sp07 se jam nut receptacle to complete part number see how to order on page 39. all lockwire holes are .044 dia. min. s h s j n a m k p r l j n f a m r p k l j n g a r m l p k
37 d c b e l a h k l termination assemblies ?se? open wire seal, ?se? (sr) strain relief pt08se-xx-xxx sp08se-xx-xxx pt08se-xx-xxx (sr) sp08se-xx-xxx (sr) ?sp? potting boot 75 degrees pt08sp-xx-xxx sp08sp-xx-xxx to complete part number see how to order on page 39. all lockwire holes are .044 dia. min. all dimensions for reference only. shell size plug front view plug side view g dia. max. class ?se?, ?se? (sr) class ?sp? b .031 c +.010 ?.025 d .062 e +.047 ?.025 l max. a .025 h .015 k .015 l max. 10 .921 .749 .170 1.191 .393 2.137 .547 .438 .562 2.031 12 1.046 .812 .264 1.191 .450 2.222 .625 .516 .688 2.093 14 1.171 .905 .310 1.254 .519 2.370 .734 .625 .781 2.203 16 1.297 1.030 .330 1.316 .583 2.572 .750 .656 .890 2.250 18 1.422 1.015 .444 1.562 .621 2.680 .781 .703 1.000 2.296 20 1.562 1.077 .510 1.625 .683 2.753 .859 .766 1.125 2.343 22 1.672 1.139 .515 1.719 .739 2.799 .906 .812 1.234 2.390 24 1.797 1.250 .656 1.750 .787 3.037 1.181 .918 1.374 2.624 pt08 se sp08 se 90 degree plug g
38 breakaway pt-se with crimp contacts, potted termination 71-4196xx-( ) 72-4196xx-( ) breakaway pt-se with crimp contacts, environmental with strain relief 71-2511xx-( ) 72-2511xx-( ) breakaway pt-se with crimp contacts, environmental 71-3455xx-( ) 72-3455xx-( ) pt-se breakaway twist pull plug part number* part number* part number* shell size a dia. max. b max. c +.020 ?.000 d +.020 ?.000 f dia. .016 h dia. .016 j .010 l max. l 1 max. l 2 max. 71-419646 71-251181 71-345510 10 1.125 1.125 .030 .337 .188 .444 .353 1.875 2.140 2.156 71-419647 71-251182 71-345512 12 1.281 1.406 .030 .337 .312 .558 .353 1.875 2.156 2.406 71-419648 71-251183 71-345514 14 1.438 1.562 .030 .337 .375 .683 .353 1.906 2.203 2.406 71-419649 71-251184 71-345516 16 1.562 1.688 .030 .337 .500 .808 .353 1.969 2.250 2.531 71-419650 71-251185 71-345518 18 1.718 1.844 .030 .337 .625 .909 .353 2.000 2.281 2.531 71-419651 71-251186 71-345520 20 1.875 2.000 .092 .399 .625 1.034 .415 2.281 2.359 2.719 71-419652 71-251187 71-345522 22 2.031 2.188 .092 .399 .750 1.159 .415 2.344 2.453 2.844 71-419653 71-251188 71-345524 24 2.156 2.312 .092 .399 .800 1.284 .415 2.406 2.453 2.906 all dimensions for reference only. * see finish information below to determine prefix 71 or 72 in part number. drawing above shows standard lanyard length. the pt-se miniature breakaway connector has the following design features: ? crimp front release, front removable contacts in ?se? spring tower retention system ? 3 styles available: potted termination, environmental style and environment style with a strain relief ? instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated ? intermateable with standard receptacles ? operating voltage to 900 vac (rms) at sea level ? quick positive bayonet coupling and 5 key/keyway polarization order by amphenol propriety number as follows (example part number shown): 71 - 4196 50 - 32 p 12345 1. finish ?71? designates corrosion resi stant olive drab cadmium plate ?72? designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 h r. extended salt spray. 2. connector type identification 4196xx designates pt-se plug, crimp, potted termination style 2511xx designates pt-se plug, crimp, environmental with strain relief style 3455xx designates pt-se plug, crimp, environmental 3. shell size see part number columns in chart above for 2 digit number at end t hat correlates to the shell size. example: ?50? correlates to shell size 18. 4. insert arrangement number see insert availability for miniature breakaway connectors on page 6. the number following the hyphen is the insert arrangement number. pin contacts socket contacts amphenol letter equates to ms letter amphenol letter equates to ms letter gpwhsw ipxjsx kpylsy m pz n sz 5. contact type/alternate insert rotation p designates pin, s designates socket for normal positioning of inserts. when an alternate position of the insert is required to prevent cross-mating a different letter (other than p or s) is used. see page 7 fo r description of alternate positions; then con- vert to amphenol proprietary coding by the chart at right to complete the part number. c pin in s ert lanyard pulled taut again s t a .200 .0 3 1 dia mandrel d 4.500 j s ocket in s ert .250 l c pin in s ert d 4.500 j s ocket in s ert .250 l 1 h c pin in s ert d 5.000 j s ocket in s ert .250 l 2 f b a
39 pt-se, sp-se to more easily illustrate orderi ng procedure, part number pt00se-20- 41pw(sr) is shown as follows: pt 00 se - 20 - 41 p w (sr) 1 2345678 see code below: 1. connector type ?pt? designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with crimp contacts ?mf? designates standard olive drab, electrically conductive cadmium plated, bayonet lock connector with dual mounting holes, and crimp contacts ?sp? designates electrically non-conductive, hard anodic coated, bayonet lock connector with larger flange and mounting holes for back panel mounting, and crimp contacts ?ptg? designates plug with grounding fingers 2. shell style ?00? designates wall mounting receptacle ?01? designates cable connecting receptacle* ?02? designates box mounting receptacle ?06? designates straight plug ?07? designates jam nut receptacle ?08? designates 90 degree plug 3. service classes ?se? designates env ironmental crimp ?sp? designates potted type crimp both of the above are amphenol propr ietary versions of the mil-c- 26482, series 1 crimp contact connect or and offer 15 lbs. contact reten- tion for size 20 contacts; 25 lbs. for size 16 contacts. 4. shell size ?20? designates shell size. s hell sizes 8 through 24 available. 5. insert arrangement refer to pages 4-11 for insert availability. ?20 - 41? designates insert arr angement. (the number following the hyphen is the number only that is used in the part number). 6. contacts ?p? designates pin contacts ?s? designates socket contacts 7. insert rotation refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in its shell from ?normal? position. no letter required fo r normal (no rotation) position. 8. ?sr? designates a strain relief clamp. indicate optional finishes as follows: (003) olive drab cadmium plate (standard on ?pt?) (005) anodic coating - alumilite ? (standard on ?sp?) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief or rohs compliant finish suffix as follow: (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (470) non-conductive black zinc cobalt plating with strain relief (476) conductive black zinc cobalt with strain relief ms/pt-se mil-c-26482, series 1 to more easily illustrate or dering procedur e, part number ms3120e20-41pw is shown as follows: ms 312 0 e 20 ? 41 p w 1 2345678 see code below: 1. ?ms? designates military standard 2. specification number ?312? designates basic family for mil-c-26482, series 1 crimp type 3. shell style ?0? designates wall mounting receptacle ?1? designates cable connecting receptacle* ?2? designates box mounting receptacle ?4? designates jam nut receptacle ?6? designates straight plug ?7? designates box mounting receptacle with dual mounting holes ?8? designates wall mounting receptacle with dual mounting holes 4. service class ?e? designates environmental resisting connector ?f? designates environmental resisting connector with strain relief ?p? designates potted type with potting boot 5. shell size ?20? designates shell size. s hell sizes 8 through 24 available 6. insert arrangement refer to pages 4-11 for insert availability. ?20 - 41? designates insert arrangement. (the number follow- ing the hyphen is the number only that is used in the part number). 7. contacts ?p? designates pin contacts ?s? designates socket contacts 8. insert rotation refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in its shell from the ?normal? position. no letter required for normal (no rotation) position. * this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. for ordering miniature breakaway pt-se crimp connectors see pg. 38. pt-se, sp-se, ms/pt-se how to order r o h s a m p h e n o l e u / 2 0 0 2 / 9 5 / e c how to order pt-se, sp-se, ms/pt-se
40 amphenol pt-ce, sp-ce bayonet coupling, crimp termination amphenol ? ce crimp type miniature connectors provide performance and versatility needed for applications demanding high reliability and crimp removable contacts. these crimp contacts are rear insertable/front release and are held in position by a nylon wafer retention system. the sp-ce series is a modification of the pt-ce, providing special shells with a wide mounting flange for back panel mounting. a corrosion resistant electrically conductive finish of cadmium plate with an olive drab chromate after-treatment is used on the pt-ce. the sp-ce is given a durable nonconductive hard anodic ?alumilite? ? coating which provides abrasion protection and resistance to corrosion. shell components for these versions are aluminum. the dependable 5 key/keyway polarization with bayonet lock cou- pling assures positive mating with no chance of cross plugging. spring tension provided by a wave washer in the coupling nut ensures maintenance of interfacial seal between mating halves. both the insert and main joint gasket are molded from resilient neoprene. this provides excellent moisture sealing at the gas- ket and superior electrical isolation of the contact in the insert. both pins and sockets are machined form a copper alloy and are gold plated. this gold plating eliminates contact corrosion and offers an indefinite shelf life. socket contacts for these series are a closed entry design. breakaway style plug is available in pt-ce crimp. the pt-ce and sp-ce series are intermateable and inter- mountable with all existing miniature cylindrical series connec- tors except for the threaded coupling pc series. refer to pages 4-11 for insert arrangement availability. * this connector style is sometimes referred to as a cable connecting ?plug.? it does, however, mate with a straight or 90 degree plug. ? wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle breakaway twist pull plug
41 ?ce? open wire seal ?ce? (sr) strain relief ?cp? potting boot pt-ce, sp-ce ? silver plated wire per mil-c-26482 pt-ce, and sp-ce service classes pt-ce and sp-ce connectors are available in the three service classes listed below. ?ce? open wire sealing ? environmental resistant, with a nut and grommet for moisture proof- ing individual wires. ?ce? (sr)strain relief clamp ? environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support. ?cp? translucent nylon boot for retaining cus- tomer applied potting compounds; held in place by a threaded ring. breakaway style - see page 48. contact specifications contact size test current maximum millivolt drop? crimp well diameter minimum well depth 20 7.5 55 .045 .359 16 13.0 49 .063 .234 service rating service rating recommended operating ac voltage at sea level test voltage ac (rms), 60 cps sea level 50,000 ft. 70,000 ft. 110,000 ft. i 600 1,500 500 375 200 ii 1,000 2,300 750 500 200 +.002 ?.001 +.004 ?.001 bayonet coupling with crimp contacts pt-ce, sp-ce
42 termination assemblies ?ce? open wire seal pt00ce-xx-xxx sp00ce-xx-xxx ?ce? (sr) strain relief pt00ce-xx-xxx (sr) sp00ce-xx-xxx (sr) ?cp? potting boot pt00cp-xx-xxx sp00cp-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view r (tp) s .016 a dia. +.001 ?.005 k +.025 ?.010 m +.010 ?.000 class ?ce? class ?ce? (sr) class ?cp? l max. n dia. max. g dia. h max. l max. d dia. l max. n dia. max. pt sp pt sp pt sp pt sp 6 .469 .641 .688 .953 .348 .493 .524 .431 .462 1.468 .440 ? ? ? ? ? ? 8 .594 .734 .812 1.047 .473 .493 .524 .431 .462 1.468 .560 .125 .797 2.031 .327 1.683 .608 10 .719 .812 .938 1.125 .590 .493 .524 .431 .462 1.468 .685 .188 .859 2.031 .444 1.683 .734 12 .812 .938 1.031 1.250 .750 .493 .524 .431 .462 1.468 .813 .312 .984 2.031 .558 1.683 .858 14 .906 1.031 1.125 1.344 .875 .493 .524 .431 .462 1.468 .930 .375 1.109 2.031 .683 1.683 .984 16 .969 1.125 1.219 1.438 1.000 .493 .524 .431 .462 1.468 1.057 .500 1.172 2.156 .808 1.683 1.110 18 1.062 1.203 1.312 1.516 1.125 .493 .524 .431 .462 1.468 1.175 .625 1.422 2.156 .909 1.683 1.234 20 1.156 1.297 1.438 1.672 1.250 .650 .650 .556 .556 1.562 1.301 .625 1.422 2.266 1.034 1.750 1.360 22 1.250 1.375 1.562 1.750 1.375 .650 .650 .556 .556 1.562 1.428 .750 1.609 2.266 1.159 1.750 1.484 24 1.375 1.500 1.688 1.875 1.500 .683 .683 .589 .589 1.625 1.555 .800 1.703 2.328 1.284 1.782 1.610 pt00 ce sp00 ce wall mounting receptacle to complete part number see how to order on page 49. (mmc) located within .005 dia. of (tp) s s r (tp) r (tp) pt .120 .005 dia. (.147 .005 dia., size 24) sp .150 .005 dia. 4 holes m k n a l agh k m l ad l k m n
43 termination assemblies ?ce? open wire seal pt01ce-xx-xxx sp01ce-xx-xxx ?ce? (sr) strain relief pt01ce-xx-xxx (sr) sp01ce-xx-xxx (sr) ?cp? potting boot pt01cp-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view s .016 a dia. +.001 ?.005 k .016 class ?ce? class ?ce? (sr) class ?cp? l max. n dia. g dia. h dia. l max. d dia. min. l max. n dia. max. 6 .688 .348 .094 1.468 .440 ? ? ? ? ? ? 8 .812 .473 .094 1.468 .560 .125 .797 1.982 .327 1.702 .608 10 .938 .590 .094 1.468 .685 .188 .859 1.982 .444 1.702 .734 12 1.031 .750 .094 1.468 .813 .312 .984 1.982 .558 1.702 .858 14 1.125 .875 .094 1.468 .930 .375 1.109 1.982 .683 1.702 .984 16 1.219 1.000 .094 1.468 1.057 .500 1.172 2.114 .808 1.702 1.110 18 1.312 1.125 .094 1.468 1.175 .625 1.422 2.114 .909 1.702 1.234 20 1.438 1.250 .115 1.562 1.301 .625 1.422 2.207 1.034 1.796 1.360 22 1.562 1.375 .115 1.562 1.428 .750 1.609 2.207 1.159 1.796 1.484 24 1.688 1.500 .115 1.625 1.555 .800 1.703 2.219 1.284 1.827 1.610 pt01 ce cable connecting receptacle note:this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. to complete part number see how to order on page 49. s s k n a l agh l ad l h k k
44 pt02ce-xx-xxx sp02ce-xx-xxx pt02cp-xx-xxx sp02cp-xx-xxx to complete part number see how to order on page 49. (mmc) located within .005 of (tp) all dimensions for reference only. shell size receptacle front view receptacle side view r s .016 t dia. .005 a dia +.001 ?.005 d h dia. max. k +.025 ?.010 l max. m +.010 ?.000 n dia. max. pt sp pt sp pt sp pt sp pt sp pt sp 8 .594 .734 .812 1.047 .120 .150 .473 .344 .312 .317 .493 .524 1.250 .431 .462 .449 10 .719 .812 .938 1.125 .120 .150 .590 .344 .312 .441 .493 .524 1.250 .431 .462 .573 12 .812 .938 1.031 1.250 .120 .150 .750 .344 .312 .566 .493 .524 1.250 .431 .462 .699 14 .906 1.031 1.125 1.344 .120 .150 .875 .344 .312 .683 .493 .524 1.250 .431 .462 .823 16 .969 1.125 1.219 1.438 .120 .150 1.000 .344 .312 .808 .493 .524 1.250 .431 .462 .949 18 1.062 1.203 1.312 1.516 .120 .150 1.125 .344 .312 .899 .493 .524 1.250 .431 .462 1.073 20 1.156 1.297 1.438 1.672 .120 .150 1.250 .406 .406 1.034 .650 .650 1.312 .556 .556 1.199 22 1.250 1.375 1.562 1.750 .120 .150 1.375 .406 .406 1.155 .650 .650 1.312 .556 .556 1.323 24 1.375 1.500 1.688 1.875 .147 .150 1.500 .436 .436 1.279 .683 .683 1.312 .589 .589 1.449 pt02 ce sp02 ce box mounting receptacle s s r (tp) r (tp) t dia. 4 holes l k m an h d
45 termination assemblies ?ce? open wire seal pt06ce-xx-xxx sp06ce-xx-xxx ?ce? (sr) strain relief pt06ce-xx-xxx (sr) sp06ce-xx-xxx (sr) ?cp? potting boot pt06cp-xx-xxx sp06cp-xx-xxx all dimensions for reference only. shell size plug front view plug side view s dia. max. z +.035 ?.040 z 1 +.035 ?.040 class ?ce? class ?ce? (sr) class ?cp? l max. n dia. g dia. h max. l max. d dia. l max. n dia. max. 6.609.772.6311.457.440?????? 8 .734 .772 .631 1.457 .560 .125 .797 2.019 .327 1.707 .608 10 .844 .772 .631 1.457 .685 .188 .859 2.019 .444 1.707 .734 12 1.016 .772 .631 1.457 .813 .312 .984 2.019 .558 1.707 .858 14 1.141 .772 .631 1.457 .930 .375 1.109 2.019 .683 1.707 .984 16 1.266 .772 .631 1.457 1.057 .500 1.172 2.144 .808 1.707 1.110 18 1.375 .772 .631 1.457 1.175 .625 1.422 2.144 .909 1.707 1.234 20 1.516 .710 .569 1.487 1.301 .625 1.422 2.175 1.034 1.707 1.360 22 1.641 .710 .569 1.487 1.428 .750 1.609 2.175 1.159 1.707 1.484 24 1.761 .710 .569 1.550 1.555 .800 1.703 2.237 1.284 1.832 1.610 pt06 ce sp06 ce straight plug to complete part number see how to order on page 49. s l n z pin contacts z1 socket contacts l n g z pin contacts z1 socket contacts l n d z pin contacts z1 socket contacts
46 termination assemblies ?ce? open wire seal pt07ce-xx-xxx sp07ce-xx-xxx ?ce? (sr) strain relief pt07ce-xx-xxx (sr) sp07ce-xx-xxx (sr) ?cp? potting boot pt07cp-xx-xx sp07cp-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view h hex. +.017 ?.016 s .016 a dia. +.001 ?.005 j flat +.000 ?.010 k .016 m .005 panel thickness class ?ce? class ?ce? (sr) class ?cp? min. max. l max. n max. g dia. l max. n max. d dia. min. l max. n dia. max. 8 .750 .938 .473 .530 .125 .696 .062 .125 .827 .730 .125 1.297 .797 .327 .875 .608 10 .875 1.062 .590 .655 .125 .696 .062 .125 .827 .855 .188 1.297 .859 .444 .875 .734 12 1.062 1.250 .750 .818 .125 .696 .062 .125 .827 .980 .312 1.297 .984 .558 .875 .858 14 1.188 1.375 .875 .942 .125 .696 .062 .125 .827 1.105 .375 1.297 1.109 .683 .875 .984 16 1.312 1.500 1.000 1.066 .125 .696 .062 .125 .827 1.230 .500 1.422 1.172 .808 .875 1.110 18 1.438 1.625 1.125 1.191 .125 .696 .062 .125 .827 1.355 .625 1.422 1.422 .909 .875 1.234 20 1.562 1.812 1.250 1.316 .156 .884 .062 .250 .733 1.511 .625 1.328 1.422 1.034 .969 1.360 22 1.688 1.938 1.375 1.441 .156 .884 .062 .250 .733 1.636 .750 1.328 1.609 1.159 .969 1.484 24 1.812 2.062 1.500 1.566 .156 .917 .062 .250 .762 1.761 .800 1.422 1.703 1.284 .969 1.610 pt07 ce sp07 ce jam nut receptacle to complete part number see how to order on page 49. all lockwire holes are .044 dia. min. s h s j n a m k r p l j n g a m r p k l j n d a r ml p k
47 d c b e l a h k l pt08 ce sp08 ce 90 degree plug termination assemblies ?ce? open wire seal, ?ce? (sr) strain relief pt08ce-xx-xxx sp08ce-xx-xxx pt08ce-xx-xxx (sr) sp08ce-xx-xxx (sr) ?cp? potting boot 75 pt08cp-xx-xxx sp08cp-xx-xxx all dimensions for reference only. shell size plug front view plug side view g dia. max. class ?ce?, ?ce? (sr) class ?cp? b .031 c +.010 ?.025 d .062 e +.047 ?.025 l .057 a .025 h .015 k .015 l max. 8 .796 .655 .169 .941 .339 1.986 .469 .312 .438 1.906 10 .921 .749 .170 1.191 .393 2.080 .547 .438 .562 2.031 12 1.046 .812 .264 1.191 .450 2.165 .625 .516 .688 2.093 14 1.171 .905 .310 1.254 .519 2.313 .734 .625 .781 2.203 16 1.297 1.030 .330 1.316 .583 2.515 .750 .656 .890 2.250 18 1.422 1.015 .444 1.562 .621 2.623 .781 .703 1.000 2.296 20 1.562 1.077 .510 1.625 .683 2.739 .859 .766 1.125 2.343 22 1.672 1.139 .515 1.719 .739 2.785 .906 .812 1.234 2.390 24 1.797 1.265 .656 1.751 .797 3.024 1.169 .918 1.374 2.624 to complete part number see how to order on page 49. all lockwire holes are .044 dia. min. g
48 breakaway pt-ce with crimp contacts, potted termination 71-2512xx-( ) 72-2512xx-( ) pt-ce breakaway twist pull plug all dimensions for reference only. * see finish information below to determine prefix 71 or 72 in part number. drawing above shows standard lanyard length. part number* part number* shell size a dia. max. b max. f dia. .016 h dia. .016 j .010 l max. l 1 max. 71-251209 71-339508 8 .875 .984 .125 .327 .353 1.937 2.937 71-251210 71-339510 10 1.125 1.125 .188 .444 .353 1.890 2.937 71-251211 71-339512 12 1.281 1.406 .312 .558 .353 1.906 3.000 71-251212 71-339514 14 1.438 1.562 .375 .683 .353 1.953 3.000 71-251213 71-339516 16 1.562 1.688 .500 .808 .353 2.000 3.187 71-251214 71-339518 18 1.718 1.844 .625 .909 .353 2.031 3.375 71-251215 71-339520 20 1.875 2.000 .625 1.034 .415 2.234 3.375 71-251216 71-339522 22 2.031 2.188 .750 1.159 .415 2.328 3.375 71-251217 71-339524 24 2.156 2.312 .800 1.284 .415 2.359 3.625 the pt-ce miniature breakaway connector has the following design features: ? crimp front release, front removable contacts in ?ce? nylon wafer retention system ? 2 styles available: potted termination and environ- ment style with a strain relief ? instant decoupling of plug and receptacle with an axial pull on the lanyard when they are fully mated ? intermateable with standard receptacles ? operating voltage to 900 vac (rms) at sea level ? quick positive bayonet coupling and 5 key/key- way polarization order by amphenol propriety number as follows (example part number shown): 71 - 2512 50 - 32 p 12345 1. finish ?71? designates corrosion resi stant olive drab cadmium plate ?72? designates anodic coated (electrically nonconductive-anodic) finish providing extreme wear and corrosion resistance, 500 h r. extended salt spray. 2. connector type identification 2512xx designates pt-ce plug, crimp, potted termination style 3395xx designates pt-ce plug, crimp, environmental with strain relief style 3. shell size see part number columns in chart above for 2 digit number at end t hat correlates to the shell size. example: ?50? correlates to shell size 18. pin contacts socket contacts amphenol letter equates to ms letter amphenol letter equates to ms letter gpwhsw ipxjsx kpylsy mpznsz 4. insert arrangement number see insert availability for miniature br eakaway connectors on page 6. the number following the hyphen is the insert arrangement number. 5. contact type/alternate insert rotation p designates pin, s designates socket for normal positioning of inserts. when an alternate position of the insert is required to prevent cross-mating a different letter (other than p or s) is used. see page 7 for description of alternate positions; then convert to amphenol proprietary coding by the chart at right to complete the part number. breakaway pt-ce with crimp contacts, environmental with strain relief 71-3395xx-( ) 72-3395xx-( ) .328 pin in s ert .250 +.010 ?.025 .016 6.000 j socket insert +.010 ?.025 l 1 f .328 pin in s ert lanyard pulled taut again s t a .200 .0 3 1 dia. mandrel .250 +.010 ?.025 .016 6.000 j h socket insert +.010 ?.025 l b a
49 pt-ce, sp-ce to more easily illustrate ordering procedure, part number pt00ce-20-41pw (sr) is shown as follows: pt 00 ce ? 20 ? 41 p w (sr) 1234567 8 see code below: 1. connector type ?pt? designates standard electrically conductive olive drab cadmium plated bayonet lock connector with crimp contacts ?sp? designates electrically non- conductive, hard anodic coated bayonet lock connector with large flange and mounting holes for back panel mount- ing, and crimp contacts. 2. shell style ?00? designates wall mounting receptacle ?01? designates cable connecting receptacle* ?02? designates box mounting receptacle ?06? designates straight plug ?07? designates jam nut receptacle ?08? designates 90 plug 3. service class ?ce? designates env ironmental crimp ?cp? designates potted type crimp both of the above are amphenol ? proprietary versions of the mil-c- 26482, series 1 crimp contact connector and offer 7 lbs. contact retention for size 20 contacts; 9 lbs for size 16 contacts. 4. shell size ?20? designates shell size. s hell sizes 6 through 24 available. 5. insert arrangement refer to pages 4-11 for insert availability. ?20 ? 41? designates insert arr angement. (the number following the hyphen is the number only that is used in the part number). 6. contacts ?p? designates pin contacts. ?s? designates socket contacts. 7. insert rotation refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in its shell from the ?nor- mal? position. no letter requir ed for normal (no rotation) position. 8. ?(sr)? designates strain relief clamp. indicate optional finishes as follows: (003) olive drab cadmium plate (standard on ?pt?) (005) anodic coating - alumilite ? (standard on ?sp?) (014) olive drab cadmium plate over nickel (023) electroless nickel (024) olive drab zinc cobalt plating (025) non-conductive black zinc cobalt plating (027) conductive black zinc cobalt plating (424) electroless nickel finish with strain relief (466) olive drab zinc cobalt plating with strain relief (470) non-conductive black zinc cobalt plating with strain relief (476) conductive black zinc cobalt with strain relief * this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. for ordering miniature breakaway pt-ce crimp connectors see page 48. pt-ce, sp-ce how to order how to order pt-ce, sp-ce
50 amphenol pc threaded coupling and solder termination ? wall mounting receptacle cable connecting receptacle* box mounting receptacle straight plug jam nut receptacle amphenol ? pc series threaded coupling miniature cylin- drical connectors incorporate solder contacts. the pc dou- ble stub threaded coupling system cannot be cross threaded, and is mechanically assisted while engaging and disengaging. shell components are aluminum. bright cadmium plating to qq-p-416 with a clear chromate after-treatment provides a golden colored conductive finish. single key/keyway polariza- tion represents maximum simplicity in a design proven in mil- lions of an connectors. both pins and sockets are machined from a copper alloy and are gold plated. this gold plating eliminates contact corrosion and offers an indefinite shelf life. socket contacts for these series are a closed entry design. both the insert and main joint gasket are molded from resilient neoprene. this provides excellent moisture sealing at the gas- ket and superior electrical insulation of the contacts in the insert. the pc is intermateable and intermountable within the pc threaded coupling series. refer to pages 4-11 for insert arrangement availability. * this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. pc-se and pc-ce, which are thr eaded coupling and incorporate crimp contacts, are briefly covered on pages 62 and 63. it is necessary to contact amphenol for ordering information on these types.
51 pc ? silver plated wire per mil-c-26482 pc service classes pc connectors are available in the service classes listed below. each class except the hermetic seal receptacle has one or more means of terminating or supporting a cable or wire bundle. ?a? general duty; back shell is threaded for con- duit attachment of ms3057 cable clamp. ?a? (sr) general duty; with strain relief clamp for cable or wire bundle support. ?c? pressurized receptacle; less than 1 cu. in. per hour leakage at 30 psi over a tempera- ture range of ?65f to +257f in accor- dance with bsc-c1p specification. ?e? environment resistant; with nut and grom- met for moisture proofing individual wires. ?e? (sr) environment resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support. ?p? translucent nylon boot for retaining cus- tomer applied potting compounds; held in place by a threaded ring. ?p? (sr) strain relief clamp suitable for retaining cus- tomer applied potting compounds, with pro- vision for wire support. ?w? compressing clamp and neoprene gland for moisture proofing multi-conductor jacketed cables. telescoping sleeves (ms 3420a) can be used to adapt to cables smaller than minimum close down. ?h?* hermetically sealed with compression glass inserts. refer to pages 57-60 for hermetic versions within the pc solder series. contact specifications contact size test current maximum millivolt drop? solder well diameter solder well depth 20 7.5 55 .046 .125 16 13.0 50 .078 .188 service rating service rating recommended operating ac voltage at sea level test voltage ac (rms), 60 cps sea level 50,000 ft. 70,000 ft. 110,000 ft. i 600 1,500 500 375 200 ii 1,000 2,300 750 500 200 +.005 ?.003 +.004 ?.000 +.031 ?.000 +.031 ?.000 ?a? general duty ?e? (sr) strain relief ?e? ms / ?e? open wire seal ?p?, ms / ?p? potting boot ?w? cable seal threaded coupling with solder contacts pc series
52 termination assemblies ?a? general duty/ ?c? pressurized pc00a-xx-xxx pc00c-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr) strain relief pc00a-xx-xxx (sr) pc00e-xx-xxx (sr) ?e? open wire seal pc00e-xx-xxx ?p? potting boot pc00p-xx-xxx ?w? cable seal pc00w-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view a thread class 2a k max. l max. m +.000 ?.010 q thread class 2a z max. class ?a?, ?c? r .005 s .010 d min. l max. n max. v thread class 2a 6 .469 .688 .3750 ds .490 .875 .416 .3125-32 nef .466 .175 1.528 .462 .3750-32 nef 8 .594 .812 .5000 ds .490 .875 .416 .4375-28 unef .466 .297 1.528 .590 .5000-28 unef 10 .719 .938 .6250 ds .490 .875 .416 .5625-24 nef .466 .421 1.528 .717 .6250-24 nef 12 .812 1.031 .7500 ds .490 .875 .416 .6875-24 nef .466 .546 1.528 .834 .7500-20 unef 14 .906 1.125 .8750 ds .490 .875 .416 .8125-20 unef .466 .663 1.528 .970 .8750-20 unef 16 .969 1.219 1.0000 ds .490 .875 .416 .9375-20 unef .466 .787 1.528 1.088 1.0000-20 unef 18 1.062 1.312 1.1250 ds .490 .875 .416 1.0625-18 unef .466 .879 1.528 1.216 1.1875-18 nef 20 1.156 1.438 1.2500 ds .584 1.031 .479 1.1875-18 nef .527 1.014 1.588 1.332 1.1875-18 nef 22 1.250 1.562 1.3750 ds .584 1.031 .479 1.3125-18 nef .527 1.135 1.588 1.460 1.4375-18 nef shell size class ?a? (sr), ?e? (sr), ?p? (sr) class ?e? class ?p? class ?w? c thread d min. g dia. h max. l max. n max. l max. n max. d min. l max. n max. d l max. n max. closed free 6??????1.250.440.1921.406.484???? 8 6-32 .240 .125 .812 1.922 .550 1.250 .560 .317 1.406 .608 .168 .230 1.680 .547 10 6-32 .302 .188 .875 1.922 .675 1.250 .685 .434 1.406 .734 .205 .312 1.680 .675 12 6-32 .428 .312 1.000 1.922 .803 1.250 .813 .548 1.406 .858 .338 .442 1.823 .812 14 6-32 .552 .375 1.125 1.922 .920 1.250 .930 .673 1.406 .984 .416 .539 2.015 .940 16 6-32 .615 .500 1.188 2.047 1.047 1.250 1.057 .798 1.406 1.110 .550 .616 2.231 1.067 18 8-32 .740 .625 1.438 2.078 1.165 1.250 1.175 .899 1.406 1.234 .600 .672 2.461 1.194 20 8-32 .740 .625 1.438 2.344 1.290 1.434 1.301 1.024 1.562 1.360 .635 .747 2.835 1.322 22 8-32 .928 .750 1.719 2.344 1.418 1.434 1.430 1.149 1.562 1.484 .670 .846 2.999 1.449 pc00 wall mounting receptacle to complete part number see how to order on page 61. s rs r .120 .005 dia. 4 holes a m l q z k nd .375 min v l g l c n dh l n n l d nd l
53 all dimensions for reference only. shell size recept. front view receptacle side view s max. a thread class 2a l max. q thread class 2a z max. class ?e? d min. l max. n max. v thread class 2a 6 .442 .3750 ds .875 .3125-32 nef .924 .175 1.518 .462 .3750-32 nef 8 .570 .5000 ds .875 .4375-28 unef .924 .297 1.518 .590 .5000-28 unef 10 .697 .6250 ds .875 .5625-24 nef .924 .421 1.518 .717 .6250-24 nef 12 .814 .7500 ds .875 .6875-24 nef .924 .546 1.518 .834 .7500-20 unef 14 .950 .8750 ds .875 .8125-20 unef .924 .663 1.518 .970 .8750-20 unef 16 1.068 1.0000 ds .875 .9375-20 unef .924 .787 1.518 1.088 1.0000-20 unef 18 1.196 1.1250 ds .875 1.0625-18 nef .924 .879 1.518 1.216 1.1875-18 nef 20 1.312 1.2500 ds 1.031 1.1875-18 nef 1.081 1.014 1.578 1.332 1.1875-18 nef 22 1.440 1.3750 ds 1.031 1.3125-18 nef 1.081 1.135 1.578 1.460 1.4375-18 nef shell size class ?a? (sr), ?e? (sr), ?p? (sr) class ?e? class ?p? class ?w? c thread d min. g dia. h max. l max. n max. l max. n max. d min. l max. n max. d l max. n max. closed free 6 ? ? ? ? ? ? 1.250 .440 .192 1.406 .484 ? ? ? ? 8 6-32 .240 .125 .812 1.922 .550 1.250 .560 .317 1.406 .608 .168 .230 1.680 .547 10 6-32 .302 .188 .875 1.922 .675 1.250 .685 .434 1.406 .734 .205 .312 1.680 .675 12 6-32 .428 .312 1.000 1.922 .803 1.250 .813 .548 1.406 .858 .338 .442 1.823 .812 14 6-32 .552 .375 1.125 1.922 .920 1.250 .930 .673 1.406 .984 .416 .539 2.015 .940 16 6-32 .615 .500 1.188 2.047 1.047 1.250 1.057 .798 1.406 1.110 .550 .616 2.231 1.067 18 8-32 .740 .625 1.438 2.078 1.165 1.250 1.175 .899 1.406 1.234 .600 .672 2.461 1.194 20 8-32 .740 .625 1.438 2.344 1.290 1.434 1.301 1.024 1.562 1.360 .635 .747 2.835 1.322 22 8-32 .928 .750 1.719 2.344 1.418 1.434 1.430 1.149 1.562 1.484 .670 .846 2.999 1.449 pc01 cable connecting receptacle termination assemblies ?a? general duty pc01a-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr) strain relief pc01a-xx-xxx (sr) pc01e-xx-xxx (sr) pc01p-xx-xxx (sr) ?e? open wire seal pc01e-xx-xxx ?p? potting boot pc01p-xx-xxx ?w? cable seal pc01w-xx-xxx note: this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. to complete part number see how to order on page 61. s a l z q nd .375 min v l g l c n dh l n n l d nd l
54 pc02 box mounting receptacle pc02a-xx-xxx * pc02c-xx-xxx * pc02e-xx-xxx * pc02p-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view r .005 s .010 a thread class 2a k +.020 ?.010 l max. m +.010 ?.000 n max. z max. 6 .469 .688 .3750 ds .469 .801 .406 .323 .466 8 .594 .812 .5000 ds .469 .801 .406 .449 .466 10 .719 .938 .6250 ds .469 .801 .406 .573 .466 12 .812 1.031 .7500 ds .469 .801 .406 .699 .466 14 .906 1.125 .8750 ds .469 .801 .406 .823 .466 16 .969 1.219 1.0000 ds .469 .801 .406 .949 .466 18 1.062 1.312 1.1250 ds .469 .801 .406 1.073 .466 20 1.156 1.438 1.2500 ds .562 .988 .469 1.199 .527 22 1.250 1.562 1.3750 ds .562 .988 .469 1.323 .527 to complete part number see how to order on page 61. * the pc02 box mounting receptacle is made only to complete a series and no provision is made for accessories or potting on the rear skirt. s rs r .120 .005 dia. 4 holes a m l z n k
55 pc06 straight plug termination assemblies ?a? general duty pc06a-xx-xxx ?a? (sr), ?e? (sr), ?p? (sr) strain relief pc06a-xx-xxx (sr) pc06e-xx-xxx (sr) pc06p-xx-xxx (sr) ?e? open wire seal pc06e-xx-xxx ?p? potting boot pc06p-xx-xxx ?w? cable seal pc06w-xx-xxx shell size plug front view plug side view s max. a thread class 2b l max. q thread class 2a z max. class ?a? d min. l max. n max. v thread class 2a 6 .604 .3750 ds .875 .3125-32 nef .627 .175 1.534 .462 .3750-32 nef 8 .729 .5000 ds .875 .4375-28 unef .627 .297 1.534 .590 .5000-28 unef 10 .854 .6250 ds .875 .5625-24 nef .627 .421 1.534 .717 .6250-24 nef 12 .979 .7500 ds .875 .6875-24 nef .627 .546 1.534 .834 .7500-20 unef 14 1.104 .8750 ds .875 .8125-20 unef .627 .663 1.534 .972 .8750-20 unef 16 1.229 1.0000 ds .875 .9375-20 unef .627 .787 1.534 1.088 1.0000-20 unef 18 1.354 1.1250 ds .875 1.0625-18 unef .627 .879 1.534 1.216 1.1875-18 nef 20 1.478 1.2500 ds 1.031 1.1875-18 nef .783 1.014 1.613 1.332 1.1875-18 nef 22 1.604 1.3750 ds 1.031 1.3125-18 nef .783 1.135 1.613 1.460 1.4375-18 nef shell size class ?a? (sr), ?e? (sr), ?p? (sr) class ?e? class ?p? class ?w? c thread d min. g dia. h max. l max. n max. l max. n max. d min. l max. n max. d l max. n max. closed free 6 ? ? ? ? ? ? 1.250 .440 .192 1.406 .484 ? ? ? ? 8 6-32 .240 .125 .812 1.906 .550 1.250 .560 .317 1.406 .608 .168 .230 1.680 .547 10 6-32 .302 .188 .875 1.906 .675 1.250 .685 .434 1.406 .734 .205 .312 1.680 .675 12 6-32 .428 .312 1.000 1.906 .803 1.250 .813 .548 1.406 .858 .338 .442 1.823 .812 14 6-32 .552 .375 1.125 1.906 .920 1.250 .930 .673 1.406 .984 .416 .539 2.015 .940 16 6-32 .615 .500 1.188 2.047 1.047 1.250 1.057 .798 1.406 1.110 .550 .616 2.231 1.067 18 8-32 .740 .625 1.438 2.078 1.165 1.250 1.175 .899 1.406 1.234 .600 .672 2.461 1.194 20 8-32 .740 .625 1.438 2.250 1.290 1.434 1.301 1.024 1.562 1.360 .635 .747 2.835 1.322 22 8-32 .928 .750 1.719 2.250 1.418 1.434 1.430 1.149 1.562 1.484 .670 .846 2.999 1.449 to complete part number see how to order on page 61. all dimensions for reference only s a .333 max l z q nd .375 min v l g l c n dh l n n l d nd l
56 all dimensions for reference only shell size receptacle front view receptacle side view class ?a?, ?c? f .010 h hex .016 s .010 a thread class 2a k +.016 ?.010 m .010 p panel thickness r thread class 2a z max. min. max. 6 .286 .625 .812 .3750 ds .125 .671 .062 .125 .4375-28 unef .232 8 .331 .750 .938 .5000 ds .125 .671 .062 .125 .5625-24 nef .232 10 .375 .875 1.062 .6250 ds .125 .671 .062 .125 .6875-24 nef .232 12 .442 1.062 1.250 .7500 ds .125 .671 .062 .125 .8750-20 unef .232 14 .486 1.188 1.375 .8750 ds .125 .671 .062 .125 1.0000-20 unef .232 16 .530 1.312 1.500 1.0000 ds .125 .671 .062 .125 1.1250-18 nef .232 18 .573 1.438 1.625 1.1250 ds .125 .671 .062 .125 1.2500-18 nef .232 20 .641 1.562 1.812 1.2500 ds .156 .797 .062 .250 1.3750-18 nef .262 22 .685 1.688 1.938 1.3750 ds .156 .797 .062 .250 1.5000-18 nef .262 shell size class ?e? class ?a? (sr), ?e? (sr) class ?p? l max. n max. c thread g dia. h max. l max. p min. d min. l max. n max. 6 .692 .605 ? ? ? ? ? .192 .665 .484 8 .692 .730 6-32 .125 .812 1.096 .240 .317 .665 .608 10 .692 .855 6-32 .188 .875 1.096 .302 .434 .665 .734 12 .692 .980 6-32 .312 1.000 1.096 .428 .548 .665 .858 14 .692 1.105 6-32 .375 1.125 1.096 .552 .673 .665 .984 16 .692 1.230 6-32 .500 1.188 1.228 .651 .798 .665 1.110 18 .692 1.355 8-32 .625 1.438 1.228 .740 .899 .665 1.234 20 .754 1.511 8-32 .625 1.438 1.291 .740 1.024 .790 1.360 22 .754 1.636 8-32 .750 1.625 1.291 .928 1.149 .790 1.484 pc07 jam nut receptacle ?a? general duty/ ?c? pressurized receptacle pc07a-xx-xxx pc07c-xx-xxx termination assemblies ?e? open wire seal pc07e-xx-xxx ?a? (sr), ?e? (sr) strain relief pc07a-xx-xxx (sr) pc07e-xx-xxx (sr) ?p? potting boot pc07p-xx-xxx to complete part number see how to order on page 61. m z r a p k s h s f f n mz r a pl mz r a pl gdh n d mz r a pl
57 solder mounting receptacle box mounting receptacle jam nut receptacle pc hermetic three shell styles are available in the hermetic pc threaded series: ?pc i h ?pc02h ?pc07h these hermetic connectors are available with solder cup or flat eyelet pin contacts. socket contacts are available in some ver- sions. other design characteristics of the pc hermetic connec- tor series are as follows: shell size: 6 thru 22. (tin plated) contact count: 2 through 65. refer to pages 4 and 5 for insert availability for hermetics. current: 5.0 amp, each #20 contact; 10 amp, each #16 contact; 17 amp, each #12 contact. contacts: fabricated from high nickel alloy and tin plated. dielectric withstanding voltage (sea level): 1500 volts (rms) 60 cps service rating i; 2300 volts (rms) 60 cps service rating ii. compression glass inserts, permanently lettered. helium leakage: less than 1.0 x 10 -6 cc/sec. at 15 psi differential. physical shock: 100 g?s. vibration: exceeds mil-e-5272 procedure ii. thermal shock: no deterioration or failure after 5 cycles at ?55 f to +257f. refer to pages 4-11 for insert arrangement availability.
58 pc i h hermetic solder mounting receptacle *pc i h-xx-xxx ** pc i y-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view s dia. max. a thread class 2a l +.025 ?.016 n dia. +.000 ?.005 w +.011 ?.010 z max. 6 .511 .3750 ds .422 .438 .094 .387 8 .636 .5000 ds .422 .562 .094 .387 10 .761 .6250 ds .422 .672 .094 .387 12 .855 .7500 ds .422 .781 .094 .387 14 .980 .8750 ds .422 .906 .094 .387 16 1.105 1.0000 ds .422 1.031 .094 .387 18 1.229 1.1250 ds .422 1.156 .094 .387 20 1.323 1.2500 ds .422 1.250 .094 .387 22 1.439 1.3750 ds .422 1.375 .125 .418 to complete part number see how to order on page 61. * solder cup pin contacts without interfacial seal. ** solder cup pin contacts with interfacial seal s a l w z .031 +.006 ?.005 n
59 pc02h hermetic box mounting receptacle * pc02h-xx-xxx ** pc02y-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view r .005 s .010 a thread class 2a k .016 l +.010 ?.000 n dia. +.000 ?.005 t .010 z max. 6 .469 .688 .3750 ds .047 .469 .438 .062 .344 8 .594 .812 .5000 ds .047 .469 .562 .062 .344 10 .719 .938 .6250 ds .047 .469 .672 .062 .344 12 .812 1.031 .7500 ds .047 .469 .781 .062 .344 14 .906 1.125 .8750 ds .047 .469 .906 .062 .344 16 .969 1.219 1.0000 ds .047 .469 1.031 .062 .344 18 1.062 1.312 1.1250 ds .047 .469 1.156 .062 .344 20 1.156 1.438 1.2500 ds .047 .469 1.250 .062 .344 22 1.250 1.562 1.3750 ds .078 .469 1.375 .062 .377 to complete part number see how to order on page 61. * solder cup pin contacts without interfacial seal. ** solder cup pin contacts with interfacial seal rs r s .120 .005 dia. 4 holes a l k z t n
60 pc07h hermetic jam nut receptacle * pc07h-xx-xxx ** pc07y-xx-xxx all dimensions for reference only. shell size receptacle front view receptacle side view f +.010 h hex. .016 s +.010 a thread class 2a k +.000 ?.016 m .020 panel thickness r thread class 2a z +.010 min max. 6 .286 .625 .812 .3750 ds .094 .671 .062 .125 .4375-28 unef .129 8 .331 .750 .938 .5000 ds .094 .671 .062 .125 .5625-24 nef .129 10 .375 .875 1.062 .6250 ds .094 .671 .062 .125 .6875-24 nef .129 12 .442 1.062 1.250 .7500 ds .094 .671 .062 .125 .8750-20 unef .129 14 .486 1.188 1.375 .8750 ds .094 .671 .062 .125 1.0000-20 unef .129 16 .530 1.312 1.500 1.0000 ds .094 .671 .062 .125 1.1250-18 nef .129 18 .573 1.438 1.625 1.1250 ds .094 .671 .062 .125 1.2500-18 nef .129 20 .641 1.562 1.812 1.2500 ds .125 .797 .062 .250 1.3750-18 nef .034 22 .685 1.688 1.938 1.3750 ds .125 .797 .062 .250 1.5000-18 nef .034 to complete part number see how to order on page 61. * solder cup pin contacts without interfacial seal. ** solder cup pin contacts with interfacial seal s h s f f m z r a p k
61 pc to more easily illustrate ordering procedure, part number pc00a-20-41pw (sr) is shown as follows: pc 00 a ? 20 ? 41 p w (sr) 1234567 8 see code below: 1. connector type ?pc? designates bright cadmium plated with clear chromate after treat- ment, threaded coupling connector with solder contacts 2. shell style ?00? designates wall mounting receptacle ?01? designates cable connecting receptacle ? ?02? designates box mounting receptacle ?06? designates straight plug ?07? designates jam nut receptacle ? i ? designates solder-mount receptacle (hermetic only) 3. service class ?a? designates general duty back shell ?c? designates pressurized receptacle ?e? designates environmental resisting open wire seal with grommet and nut ?p? designates potted with potting boot ?w? designates clamp assembly for moisture proofing, multi- jacketed cables ?h? designates hermetic* seal (without interfacial seal) ?y? designates hermetic* seal (with interfacial seal) 4. shell size ?20? designates shell size. she ll sizes 6 through 24 available. 5. insert arrangement refer to pages 4-11 for insert availability. ?20 ? 41? designates insert arr angement. (the number following the hyphen is the number only that is used in the part number). 6. contacts ?p? designates pin contacts. ?s? designates socket contacts. 7. insert rotation refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in its shell from the ?nor- mal? position. no letter requir ed for normal (no rotation) position. 8. ?(sr)? designates strain relief clamp. indicate optional finishes as follows: (001) bright cadmium (standard on ?pc?) (003) olive drab cadmium plate (005) anodic coating - alumilite ? (011) chromate treated (iridite 14-2) (014) olive drab cadmium plate over nickel (023) electroless nickel * hermetic connectors are supplied with tin plated shells. ? this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. pc how to order how to order pc series
62 amphenol pc-se, pc-ce threaded coupling and crimp termination amphenol ? pc-se series threaded coupling miniature cylindri- cal connectors incorporate crimp contacts in a spring tower retention system. amphenol ? pc-ce series threaded coupling miniature cylindri- cal connectors incorporate crim p contacts in a nylon wafer retention system to maintain contact position. the pc double stub threaded coupling system cannot be cross threaded, and is mechanically assisted while engaging and dis- engaging. shell components are aluminum. bright cadmium plating to qq-p- 416 with a clear chromate after-treatment provides a golden colored conductive finish. single key/keyway polarization represents maxi- mum simplicity in a design proven in millions of an connectors. both pins and sockets are machined from a copper alloy and are gold plated. this gold plating eliminates contact corrosion and offers an indefinite shelf life. socket contacts for these series are a closed entry design. both the insert and main joint gasket are molded from resilient neo- prene. this provides excellent moisture sealing at the gasket and superior electrical insulation of the contacts in the insert. the pc-se and pc-ce are only intermateable and intermountable within the pc threaded coupling series. shell style drawing pages are not shown in this catalog for the pc-se and pc-ce styles. if connector drawings are needed please contact amphenol for assistance. shell styles are currently available in these series as follows: ? pc00-se, wall mounting receptacle ? pc01-se, cable connecting receptacle ? pc02-se, box mounting receptacle ? pc06-se, straight plug ? pc08-se, 90 degree plug ? pc06-ce straight plug (will mate with pc-se receptacles and pc solder receptacles) please contact amphenol for complete information, as there may be limitations in shell sizes within the pc-se and pc-ce series. refer to pages 4-11 for insert arrangement availability. * this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug. ? pc-se. pc-ce ? silver plated wire per mil-c-26482 pc-se and pc-ce service classes pc-se and pc-ce connectors are available in the three service classes listed below. ?se? open wire sealing - environmental resistant, with a nut and grommet for moisture proof- ing individual wires ?se? (sr)strain relief clamp - environmental resistant strain relief clamp and grommet for moisture proofing individual wires; provides added wire bundle support ?sp? translucent nylon boot for retaining cus- tomer applied potting compounds; held in place by a threaded ring contact specifications contact size test current maximum millivolt drop? crimp well diameter minimum well depth 20 7.5 55 .049 .001 .267 16 13.0 49 .067 .001 .236 12 23.0 42 .100 .002 .236 service rating service rating recommended operating ac voltage at sea level test voltage ac (rms), 60 cps sea level 50,000 ft. 70,000 ft. 110,000 ft. i 600 1,500 500 375 200 ii 1,000 2,300 750 500 200 ?se? open wire seal ?se? (sr) strain relief ?sp? potting boot
63 pc-se, pc-ce how to order threaded coupling with crimp contacts pc-se, pc-ce pc-se, pc-ce to more easily illustrate ordering procedure, part number pc-se00a-20-41pw (sr) is shown as follows: pc-se 00 sp ? 20 ? 41 p w (sr) 123 45678 see code below: 1. connector type ?pc-se? designates bright cadmium plated with clear chromate after treatment, threaded coupling connector wi th crimp contacts, incorporat- ing a spring tower retention system ?pc-ce? designates bright cadmium plated with clear chromate after treatment, threaded coupkling connector with crimp contacts, incorpo- rating a nylon waftr retention system to maintain contact postion 2. shell styles pc-se - consult amphenol for availability. ?00? designates wall mounting receptacle ?01? designates cable connecting receptacle ? ?02? designates box mounting receptacle ?06? designates straight plug ?08? designates 90 degree plug 2. shell style pc-ce - consult amphenol for availability. ?06? designates straight plug 3. service class ?se? designates env ironmental crimp ?sp? designates potted type crimp both of the above are amphenol ? proprietary versions of the mil-c- 26482, series 1 crimp contact connector and offer 7 lbs. contact reten- tion for size 20 contacts; 9 lbs for size 16 contacts.) 4. shell size ?20? designates shell size. pleas e contact amphenol for complete information, as there may be limitations in shell sizes with the pc-se and pc-ce series. 5. insert arrangement refer to pages 4-11 for insert availability. ?20 ? 41? designates insert arr angement. (the number following the hyphen is the number only that is used in the part number). 6. contacts ?p? designates pin contacts. ?s? designates socket contacts. 7. insert rotation refer to page 7. ?w?, ?x?, ?y?, ?z? designate that insert is rotated in its shell from the ?nor- mal? position. no letter requir ed for normal (no rotation) position. 8. ?(sr)? designates strain relief clamp. indicate optional finishes as follows: (001) bright cadmium (standard on ?pc?) (003) olive drab cadmium plate (005) anodic coating - alumilite ? (011) chromate treated (iridite 14-2) (014) olive drab cadmium plate over nickel (023) electroless nickel ? this connector style is sometimes referred to as a cable connecting ?plug?. it does, however, mate with either a straight or 90 degree plug.
64 how to order: order by 10- (proprietary) or ms part number as shown in chart above. sealing plugs ? for pt, sp, pc contact size amphenol ? part number ms number a dia. .010 b dia. .005 c .010 color code 12 10-405996-12 ms27488-12 .121 .171 .564 yellow 16 10-405996-16 ms27488-16 .083 .133 .564 blue 20 10-405996-20 ms27488-20 .060 .090 .564 red how to order: for pt, pc: 10-101949-xx (complete order number with desired shell size). for sp: 10-150949-xx (complete order number with desired shell size). mounting flange gaskets ? for pt, sp, pc shell size pt, pc 10-101949 sp 10-150949 pt, sp, pc 10-101949 10-150949 r .010 s .010 r .010 s .010 f +.016 ?.000 t .008 6 .469 .688 .641 .953 .375 .024 8 .594 .812 .734 1.047 .500 .024 10 .719 .938 .812 1.125 .625 .024 12 .813 1.031 .938 1.250 .750 .024 14 .906 1.125 1.031 1.344 .875 .024 16 .969 1.219 1.125 1.438 1.000 .024 18 1.063 1.312 1.203 1.516 1.125 .024 20 1.156 1.438 1.297 1.672 1.250 .024 22 1.250 1.563 1.375 1.750 1.375 .024 24 1.375 1.688 1.500 1.875 1.500 .024 how to order: 10-101988-xx (complete order number with desired shell size). 75 potting boots ? for pt, sp, pc shell size b max. d .015 e .015 l max. 8 .433 .312 .438 .766 10 .493 .438 .562 .830 12 .552 .516 .688 .861 14 .643 .625 .781 .916 16 .658 .656 .890 .936 18 .689 .703 1.000 .959 20 .750 .766 1.125 1.052 22 .794 .812 1.234 1.073 24 1.070 .918 1.374 1.310 all dimensions for reference only. pt, sp, pc accessories ? sealing plugs, flange gaskets, potting boots sealing plug ms27488-xx 10-405996-xx mounting flange gasket 10-101949-xx 10-150949-xx 75 potting boot 10-101988-xx s s r f r .130 dia size 6 to 22 .156 dia size 24 .160 dia 10-150949 t 15o ref b l d e b dia a dia c .1 3 5 +.0 3 0 ?.025
65 how to order: 10-101971-xx x add desired add desired finish suffix ? shell size ?1? designates bright cadmium with clear chromate ?3? designates olive drab cadmium ?5? designates alumilite ? not for use with jam nut style connectors. class ?e? strain relief clamp ? for pt, sp, pc shell size b max. c thread class 2b d min. g max. l max. 8 .550 6-32 nc .240 .812 .930 10 .675 6-32 nc .302 .875 .930 12 .803 6-32 nc .428 1.000 .930 14 .920 6-32 nc .552 1.125 .930 16 1.047 6-32 nc .615 1.188 1.062 18 1.165 8-32 nc .740 1.438 1.062 20 1.291 8-32 nc .740 1.438 1.093 22 1.418 8-32 nc .928 1.719 1.093 24 1.533 8-32 nc .928 1.719 1.093 how to order: 10-101980-xx x add desired add desired finish suffix ? shell size ?1? designates bright cadmium with clear chromate ?3? designates olive drab cadmium ?5? designates alumilite ? not for use with jam nut style connectors. classes ?a? & ?p? strain relief clamp ? for pt, sp, pc shell size b max. c thread class 2b d min. g max. l +.010 ?.020 8 .540 6-32 nc .240 .812 .843 10 .665 6-32 nc .302 .875 .843 12 .793 6-32 nc .428 1.000 .843 14 .910 6-32 nc .552 1.125 .843 16 1.037 6-32 nc .614 1.188 .975 18 1.155 8-32 nc .740 1.438 .975 20 1.281 8-32 nc .740 1.438 1.007 22 1.408 8-32 nc .928 1.719 1.007 24 1.533 8-32 nc .938 1.719 1.007 how to order: order by 97-3057-xxxx number listed above. standard finish is olive drab zinc alloy. consult amphenol, sidney, ny for alternate finishes. ? standard accessory finishes are ?1? bright cadmium with clear chromate for pc types, ?3? olive drab cadmium for pt and ms/pt types, ?5? alumilite ? for sp types. electroless nickel plating is also available on some items; consult amphenol, sid- ney, ny all dimensions for reference only. class ?a? cable clamps ? for pt, sp, pc shell size amphenol ? part number a .031 b max. c dia. min. v thread 10 97-3057-1004 .795 .842 .3125 .6250-24 12 97-3057-1007 .850 .995 .4375 .7500-20 14 97-3057-1008 .920 1.120 .5625 .8750-20 16 97-3057-1010 .920 1.216 .6250 1.0000-20 18/20 97-3057-1012 .927 1.403 .7500 1.1875-18 22/24 97-3057-1016 1.015 1.683 .9375 1.4375-18 pt, sp, pc accessories ? clamps class ?e? strain relief clamp 10-101971-xx classes ?a? & ?p? strain relief clamp 10-101980-xx class ?a? cable clamp 97-3057-xxxx bdg l c bdg l c c b a v thread accessories & tools
66 pt, sp, ms/pt accessories ? protection caps how to order proprietary receptacle caps: wall receptacle caps: 10-101960- xx x cable connecting receptacle caps: 10-101961- xx x jam nut receptacle caps: 10-101964- xx x add desired shell size add desired finish suffix ? ?1? designates bright cadmium with clear chromate ?3? designates olive drab cadmium ?5? designates alumilite ? proprietary caps are supplied with standard bead chains only (as shown in draw- ing at left). for other chain options, an ms version cap should be ordered. how to order ms version receptacle caps: wall receptacle caps: ms3181- xx -ca for sash chain -cal for long sash chain -ra for rope chain -ral for long rope chain jam nut recept. caps: ms3181- xx -na for sash chain -nal for long sash chain shell size ms versions are supplied with standard anodize finish only. for other finish options a proprietary cap should be ordered. receptacle protection caps ? for pt, sp, ms/pt shell size b dia. +.010 ?.000 c dia. +.010 ?.000 g dia. max. l +.020 ?.000 x std. & ms ra, ca, na x ms only ral/cal/nal 6 .328 .454 .577 .563 3.000 5.000 8 .454 .578 .706 .563 3.000 5.000 10 .578 .703 .816 .563 3.000 5.000 12 .703 .891 1.000 .563 3.500 5.000 14 .844 1.016 1.128 .563 3.500 5.000 16 .969 1.141 1.257 .563 3.500 5.000 18 1.094 1.266 1.367 .563 3.500 5.000 20 1.219 1.391 1.496 .563 4.000 5.000 22 1.343 1.516 1.624 .563 4.000 5.000 24 1.453 1.614 1.747 .603 4.000 5.000 how to order proprietary plug caps: 10-101957-xx x add desired shell size add desired finish suffix ? ?1? designates bright cadmium with clear chromate ?3? designates olive drab cadmium ?5? designates alumilite ? proprietary caps are supplied with standard bead chains only (as shown in draw- ing at left). for other chain options an ms version cap should be ordered. how to order ms version plug caps: ms3180- xx -ca for sash chain -cal for long sash chain -ra for rope chain -ral for long rope chain plug protection caps ? for pt, sp, ms/pt shell size n dia. +.001 ?.005 l dia. +.025 ?.015 x std. & ms ca, ra x ms only cal/ral 6 .348 .532 3.000 5.000 8 .473 .532 3.000 5.000 10 .590 .532 3.000 5.000 12 .750 .532 3.500 5.000 14 .875 .532 3.500 5.000 16 1.000 .532 3.500 5.000 18 1.125 .532 3.500 5.000 20 1.250 .594 4.000 5.000 22 1.375 .594 4.000 5.000 24 1.500 .627 4.000 5.000 ms versions are supplied with standard anodize finish only. for other finish options a proprietary cap should be ordered. receptacle protection cap for pt, sp, ms/pt connectors 10-101960-xxx 10-101961-xxx 10-101964-xxx ms3181-xxx (cable connecting ms3181-xxx (wall receptacle) receptacle) (jam nut receptacle) plug protection cap for pt, sp, ms/pt connectors ms3180-xxx 10-101957-xxx ? standard accessory finishes are ?1? bright cadmium with clear chro- mate for pc types, ?3? olive drab cadmium for pt and ms/pt types, ?5? alumilite ? for sp types. electroless nickel plating is also available on some items; consult amphenol, sidney, ny all dimensions for reference only. shell size g l x .140 dia +.010 ?.005 b x x c n l x .140 +.010 ?.005 dia for size 24 .125 +.010 ?.005 dia for size 6-22
67 pc accessories ? protection caps how to order proprietary receptacle caps for pc connectors only: wall receptacle caps: 10-101950- xx x cable connecting receptacle caps: 10-101951- xx x jam nut receptacle caps: 10-101956- xx x add desired shell size add desired finish suffix ? ?1? designates bright cadmium with clear chromate (standard for pc) ?3? designates olive drab cadmium ?5? designates alumilite ? caps for pc connectors are supplied only in proprietary versions with standard bead chains only (as shown in drawing at left). receptacle protection caps ? for pc shell size a thread class 2b b dia. +.010 ?.000 c dia. +.010 ?.000 g max. l max. x .250 6 .3750 ds .328 .454 .520 .448 3.000 8 .5000 ds .454 .578 .648 .448 3.000 10 .6250 ds .578 .703 .776 .448 3.000 12 .7500 ds .703 .891 .902 .448 3.500 14 .8750 ds .844 1.016 1.030 .448 3.500 16 1.0000 ds .969 1.141 1.157 .448 3.500 18 1.1250 ds 1.094 1.266 1.284 .448 3.500 20 1.2500 ds 1.219 1.391 1.412 .448 4.000 22 1.3750 ds 1.343 1.516 1.507 .448 4.000 how to order proprietary plug caps for pc only: 10-101955-xx x add desired shell size add desired finish suffix ? ?1? designates bright cadmium with clear chromate (standard for (pc) ?3? designates olive drab cadmium ?5? designates alumilite ? caps for pc connectors are supplied only in proprietary versions with standard bead chains only (as shown in drawing at left). ? standard accessory finishes are ?1? bright cadmium with clear chromate for pc types, ?3? olive drab cadmium for pt and ms/pt types, ?5? alumilite ? for sp types. electroless nickel plating is also available on some items; consult amphe- nol, sidney, ny all dimensions for reference only. plug protection caps ? for pc shell size a thread class 2a b +.010 ?.000 g max. l max. x .250 6 .3750 ds .328 .399 .557 3.000 8 .5000 ds .454 .526 .557 3.000 10 .6250 ds .578 .643 .557 3.000 12 .7500 ds .703 .770 .557 3.500 14 .8750 ds .844 .897 .557 3.500 16 1.0000 ds .969 1.025 .557 3.500 18 1.250 ds 1.094 1.152 .557 3.500 20 1.2500 ds 1.219 1.279 .557 4.000 22 1.3750 ds 1.343 1.416 .557 4.000 receptacle protection cap for pc connectors 10-101950-xxx 10-101951-xxx 10-101956-xxx (wall receptacle) (cable connecting (jam nut receptacle) receptacle) plug protection cap for pc connectors 10-101955-xxx g a l x .125 dia +.010 ?.005 b x x c b g a l x
68 how to order proprietary dummy receptacles: 10-150921-xx x add desired shell size add desired finish suffix ? ?1? designates bright cadmium with clear chromate ?3? designates olive drab cadmium ?5? designates alumilite ? how to order ms version dummy receptacles: ms3115-xx x add desired shell size add desired finish suffix ? -a designates alumilite ? -l designates electroless nickel -w designates olive drab cadmium dummy receptacles ? for pt, sp, ms/pt shell size k .010 m +.030 ?.000 n +.001 ?.005 proprietary version ms version r .005 s .010 r 1 (tp) s 1 (tp) 8 .062 .462 .473 .734 1.047 .594 .828 10 .062 .462 .590 .812 1.125 .719 .954 12 .062 .462 .750 .938 1.250 .812 1.047 14 .062 .462 .875 1.031 1.344 .906 1.141 16 .062 .462 1.000 1.125 1.438 .969 1.234 18 .062 .462 1.125 1.203 1.516 1.062 1.328 20 .062 .556 1.250 1.297 1.672 1.156 1.453 22 .062 .556 1.375 1.375 1.750 1.250 1.578 24 .062 .589 1.500 1.500 1.875 1.375 1.703 how to order ?o? rings: order by 10- (proprietary) only as shown in chart above. neoprene ?o? rings ? for pc shell size amphenol? part number j dia. .010 t dia. .003 6 10-101937-6 .172 .031 8 10-101937-8 .328 .031 10 10-101937-10 .406 .031 12 10-101937-12 .531 .031 14 10-101937-14 .641 .031 16 10-101937-16 .781 .031 18 10-101937-18 .906 .031 20 10-101937-20 .984 .031 22 10-101937-22 1.109 .031 pt, sp, pc accessories ? dummy receptacles, ?o? rings, plastic dust caps dummy receptacle for pt, sp, ms/pt connectors ms3115-xxx 10-150921-xxx neoprene ?o? ring for pc connectors 10-101937-xx how to order plastic dust caps: to the basic order number add the dust cap size to match connector plug or receptacle shell size, as shown in the tables above. example: 10-70506-12 would be the correct order number for a plastic dust cap for a pt00 receptacle, shell size 10. all dimensions for reference only. for pt, sp shell size plug plastic dust cap receptacle plastic dust cap 6 10-70500-8 10-70506-8s 8 10-70506-12 10-70506-10 10 10-70500-12 10-70506-12 12 10-70506-16 10-70506-14 14 10-70506-18 10-70506-16 16 10-70506-20 10-70506-18 18 10-70506-22 10-70506-20 20 10-70506-24 10-79506-22 22 10-70524-1 10-70506-24 24 10-70506-28 10-70524-1 for pc shell size plug plastic dust cap receptacle plastic dust cap 6 10-70576-6 10-70576-8 8 10-70576-8 10-70500-8 10 10-70500-8 10-70500-10 12 10-70500-10 10-70500-12 14 10-70500-12 10-70500-14 16 10-70500-14 10-70500-16 18 10-70576-18 10-70500-18 20 10-70576-20 10-70500-20 22 10-70576-22 10-70500-22 plastic dust caps s s1 s s1 r r1 r r1 .150 dia. +.004 ?.002 4 holes n m k j t
69 application tools ?se?, ?ce? the following data includes information pertaining to the application tools for crimping, insert- ing and removing size 20, 16, and 12 contacts incorporated in amphenol ? miniature cylindri- cal connectors. all crimping tools included are the ?full cycling? type, and when used as specified by the manu- facturer, provide reliable crimped wire to contact termination. tool frames and turret heads are available from approved tool manufacturers; consult amphe- nol, sidney, ny for listings. assembly instructions are available online at www.amphenol-aerospace.com see the following: l-786 for se assembly instructions l-658 for ce assembly instructions l-555 for solder type instructions crimping tools for pt-se, sp-se, pc-se, ms/pt-se (mil-c-26482, series 1) connectors contact size ms tool part number tool frame turret head 20 m22520/1-01 m22520/1-02 16 m22520/1-01 m22520/1-02 12 m22520/1-01 m22520/1-02 * use daniels th254 or equivalent for pt-ce, sp-ce, pc-ce (proprietary) connectors contact size ms tool part number tool frame turret head 20 m22520/1-01* * 16 m22520/1-01* * insertion/removal tools for pt-se, sp-se, pc-se, ms/pt-se (mil-c-26482, series 1) connectors contact size insertion tool removal tool amphenol ? contact insertion pliers amphenol ? contact insertion tool ms part number contact insertion tool amphenol ? contact removal tool ms part number contact removal tool 20 11-8107-20 11-7401-20 m81969/17-03 11-7880-20 m81969/19-07 16 11-8107-16 11-7401-16 m81969/17-04 11-7880-16 m81969/19-08 12 ? ? m81969/17-05 ? m81969/19-09 for pt-ce, sp-ce, pc-ce (proprietary) connectors contact size insertion/removal tool contact insertion pliers contact removal tool kit 20 11-6782 11-6900 16 11-6781 11-6900
70 the following tables provide part number information for crimp contacts used in amphenol ? miniature cylindrical connectors. for additional infor- mation, consult amphenol, sidney, ny. ?? listed are insertable/removable contacts; however, it is intended that contacts be terminated with solder. for additional thermocouple contact information, consult amphenol, sidney, ny. see l-776 for thermocouple contact termination instructions. these are online at www.amphenol-aerospace.com for pcb contacts for miniature connectors, see page 20. crimp contacts for mil-c-26482, series 1 (pt-se, sp-se) connectors contact size accommodates wire size pins sockets ms number amphenol ? proprietary number ms number amphenol ? proprietary number 20 20, 22 & 24 awg m39029/31-240 10-314980-20p m39029/32-259 lp-597820-355 16 16, 18 & 20 awg m39029/31-228 10-314980-16p m39029/32-247 10-257982-16f 12 12 & 14 awg m39029/31-235 10-807100-125 m39029/32-254 10-807103-125 20-16 16 awg 10-330930-20f 10-807155-205 16-20 20 awg 10-330932-16f 10-330933-16f 12-10 12 awg 10-330938-12f 10-330939-12f crimp contacts fo r pt-ce (proprietary) connectors contact size accommodates wire size pins sockets amphenol ? proprietary number amphenol ? proprietary number 20 20, 22 & 24 awg 10-189000-20f 10-597817-351 20-16 16 awg 10-195962-20f 10-195963-20f 16 16, 18 & 20 awg 10-189004-16f 10-189006-16f thermocouple contacts for miniature connectors size material pins proprietary part number sockets proprietary part number ce se ce se 16 crimp termination chromel 10-252900-21p 10-330940-21p 10-252900-21s 10-330940-21s alumel 10-252900-22p 10-330940-22 p 10-252900-22s 10-330940-22s iron constantan 20 crimp termination chromel 10-252900-1p 10-330940-1p 10-252900-1s 10-330940-1s alumel 10-252900-2p 10-330940-2p 10-252900-2s 10-330940-2s iron 10-252900-3p 10-330940-3p 10-252900-3s 10-330940-3s constantan 10-252900-4p 10-330940-4p 10-252900-4s 10-330940-4s 20 solder termination ?? chromel 10-314910-1p 10-314910-1s alumel 10-314910-2p 10-314910-2s iron 10-314910-3p 10-314910-3s constantan 10-314910-4p 10-314910-4s contacts - power and thermocouple crimp for miniature cyli ndrical connectors
71 coaxial contacts for miniature cyli ndrical connectors amphenol ? miniature connectors can incorporate shielded coax contacts. the miniature family is built around mil-c-26482 specifications, with mil- approved and proprietary styles offered. normal operating voltage for minia- ture cylindricals with power only contacts is up to 1,000 vac (rms) at sea level. miniature cylindricals offer these features for contact termination flexibility: ? several insert arrangements that can incorporate: ? size 8 & 12 crimp coax contacts for crimp type ? size 8 & 12 solder coax contacts for solder type ? wide selection of connector shell styles and sizes ? standard power contact options within the various connector styles include: solder type, crimp front release, crimp rear release ? coax contacts are designed to the same high performance standards as power contacts. coax and power contacts may be intermixed with no deg- radation of connector reliability. ? no mis-mating or cross-plugging with insert rotation and keyway polarization. general ordering information amphenol miniature cylindricals are normally supplied with a full complement of power contacts, separately packaged. coax contacts are ordered by part number as referenced in the part number charts on the following pages of this catalog, and are substituted for the power contacts at the time of the cable or equipment assembly. if the application is for coax only, the connector may be ordered less contacts and no power contacts will be supplied. installation instructions for the coax contacts for miniature connectors are provided in amphenol documents as follows: l-633 for solder type; l-613 for se type; l-660 for ce type. how to order: a. select the coax contacts designed for the cable being used from the appli- cable charts in this catalog for each miniature type (solder, se or ce). b. select a connector insert from those shown on pages60-63 which will accommodate the quantity and size of coaxial contacts needed plus any power contacts required. note: size 8s and 12s contacts are used with connector inserts through shell size 18 only. for larger connector shell sizes, use size 8l contacts. c. determine the miniature cylindrical type, shell style, finish, service class and insert rotation required for your application. d. consult amphenol, sidney ny with the pertinent cable, contact, insert arrangement and connector style choices for complete connector part number. solder coax contact for use in miniature solder type connectors pin crimp coax contact for use in miniature crimp se type connectors socket crimp coax contact for use in miniature crimp se type connectors contacts
72 coaxial contacts for miniature cylindric al connectors, cont. amphenol ? coaxial contacts designed for use in miniature cylindrical connectors offer the same durability advantages and design benefits for reliable interconnection as the amphenol coax contacts used in high performance d38999 connectors. a variety of military and commercial shielded cables are accommodated within the miniature cylindrical series. amphenol supplies coax contacts for solder, crimp se and crimp ce connector styles. other features of the coax for miniature cylindricals include: ? miniature coax design has an outside nut within the assembly for fast, reliable assembly of contact to cable. ? all types feature solder style inner contacts and crimp style outer contacts for reliable cable termination ? miniature coax crimp type contacts are designed for use in miniature crimp series connectors ? miniature coax solder type contacts are designed for use in miniature solder series connectors. these come pre-installed into the solder connector. typical electrical performance size 8 and 12 coax contacts contact resistance: center @ 1 amp, 170 millivolts max. voltage drop @ 25c outer @ 12 amps, 150 millivolts max. voltage drop @ 25c dielectric withstanding voltage: size 8: 1,300 vac rms @ sea level size 12: 1,000 vac rms @ sea level size 8 & 12: 250 vac rms @ 50,000 ft. insulation resistance 5,000 megohms minimum @ 25c typical vswr for size 8 & 12 pt-se types ii & iii only: 1.2 + .12f (ghz) up to 10 ghz explanation of type classifications: pt-se type i is moisture seal design with internal o-ring. pt-se type ii is 50 ohm impedance matched version. contacts ter- minated to other than 50 ohm cables are therefore not matched. pt-se type iii is 50 ohm contact, non-serviceable after assembly solder and ce types are non-impedance matched contacts. contact finishes: suffix finish 1 0.00020 min. silver over copper flash 2 0.00005 min. gold (knoop hardness 130-200) over silver 3 0.00010 min. gold (knoop hardness 130-200) over silver 4 0.00010 min. gold (knoop hardness 130-200) over copper 5 0.00005 min. gold (knoop hardness 130-200) over nickel e 0.00005 min. gold (knoop hardness 90 max.) over copper f 0.00005 min. gold (knoop hardness 130-200) over copper h 0.00010 min. gold (knoop hardness 130-200) over copper typical miniature crimp coax socket contact has crimp socket outer contact with a solder pin inner contact typical miniature crimp coax pin contact has crimp pin outer contact with a solder socket inner contact
73 coaxial contacts for miniature cylindric al connectors, cont. solder (mil-c-26482 series 1 type) - application data solder coax contacts for use in miniature solder type connectors: pt, sp, ms/pt and pc styles cable contact part number contact size dimensional data (see drawings above) crimp ferrule tools retainer nut wrench g dia. h dia. 0.001 f across flats 0.004 l length ref. pin socket pin socket mil-t-22910/7-1 tool use with die part number mil-c-22520/5-01 tool use with die part number mil-c-22520/10-01 tool use with die part number rg-58c/u, rg-141a/u, rg-303/u 21-33020-2 21-33019-2 8s 0.040 0.001 0.219 0.280 1.114 1.115 m22910/7-15 ( b) m22520/5-05 (b) m22520/5-41 (b) m22520/10-07 ( b) 11-8676-2 rg-59b/u, rg-62a/u, rg-62b/u, rg-210/u 21-33020-1 21-33019-1 8l 0.040 0.001 0.219 0.280 1.176 1.177 m22910/7-18 ( b) m22520/5-45 ( b) 11-8676-3 21-33020-3 21-33019-3 8s 0.040 0.001 0.219 0.280 1.114 1.115 rg-142b/u, times mi51115 21-33020-7* 21-33019-7* 8s 0.040 0.001 0.219 0.280 1.114 1.115 m22910/7-16 ( b) m22520/5-43 ( b) 11-8676-2 rg-161/u, rg-174a/u, rg-179b/u, rg-187a/u, rg-188a/u, rg-316/u 21-33020-32* 21-33019-32* 12s 0.0300 0.0005 0.140 0.172 1.092 1.093 m22910/7-12 ( b) m22520/5-03 ( a) m22520/5-08 (a) m22520/5-35 ( b) m22520/10-05 ( a) 11-8676-1 rg-178b/u 21-33020-4 21-33019-4* 8s 0.040 0.001 0.219 0.280 1.114 1.115 m22910/7-11 ( b) m22520/5-03 ( b) m22520/5-33 ( b) m22520/10-05 ( b) 11-8676-2 rg-196a/u 21-33020-31? 21-33061-31*? 12s 0.0300 0.0005 0.140 0.172 1.092 1.093 m22910/7-11 ( b) m22520/5-03 ( b) m22520/5-33 ( b) m22520/10-05 ( b) 11-8676-1 rg-180b/u, rg-195a/u, raychem 5022d1312-9 21-33020-5* 21-33019-5* 8s 0.040 0.001 0.219 0.280 1.114 1.115 m22910/7-15 ( b) m22520/5-05 ( b) m22520/5-41 ( b) m22520/10-07 ( b) 11-8676-2 raychem 5021d1331-9 21-33020-6* 21-33019-6* 8s 0.040 0.001 0.219 0.280 1.114 1.115 m22910/7-15 ( b) m22520/5-05 ( b) m22520/5-41 ( b) m22520/10-07 ( b) 11-8676-2 thermatics 2929-29 21-33020-33 21-33061-33 12s 0.0200 0.0005 0.140 0.172 1.092 1.093 m22910/7-13 ( b) m22520/5-37 ( b) 11-8676-1 note: contacts can be ordered by part numbers given in chart note: size 8s and 12s contacts are used with connector inserts through shell size 18 only. for larger connector shell sizes, use size 8l contacts. contact finish: for all contacts in this series feature 0.000050 minimum gold (knoop hardness 130-200). * consult amphenol, sidney ny for availability crimping tools: italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. commercial equivalents with the same die closure dimension may be used. ? 21-33020-31 and 21-33061-31 only mate with each other h g l f h g l f pin socket mating pin dia mating pin dia note: all contacts of the same size and the same inner and outer contact diameters (g & h) will mate with each other.
74 coaxial contacts for miniature cylindric al connectors, cont. crimp se (mil-c-26482 series 1 type) - application data se crimp coax contacts for use in miniature crimp type connectors: pt-se, sp-se, ms/pt-se and pc-se styles cable contact part number contact size type (see pg. 23) finish on mating parts (see pg. 23 ) dimensional data (see drawings above) crimp ferrule tools retainer nut wrench installation tools g dia. h dia. 0.001 f across flats 0.004 l length ref. insertion removal pin socket pin socket mil-t-22910/7-1 tool use with die part number mil-c-22520/5-01 tool use with die part number mil-c-22520/10-0 tool use with die part number rg-55b/u, rg-142a/u, rg-142b/u, rg-223/u 21-33012-21 21-33012-25 21-33011-21 21-33011-25 8 8 i ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-17 ( b) m22520/5-05 ( a) m22520/5-19 ( b) m22520/10-07 ( a) 11-8676-2 11-8369-5 11-8660-5 11-7880-8 11-8154-1 21-33038-21 21-33038-25* 21-33037-21 21-33037-25 8 8 i ii 4 21-33138-21( )* 21-33138-25( )* 21-33137-21( )* 21-33137-25( )* 8 8 i ii ** rg-58c/u, rg-141a/u, rg-303/u 21-33012-22 21-33012-26 21-33011-22 21-33011-26 8 8 i ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-15 ( b) m22520/5-05 ( b) m22520/5-41 ( b) m22520/10-07 ( b) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 21-33038-22* 21-33038-26* 21-33037-22 21-33037-26* 8 8 i ii 4 21-33138-22( )* 21-33138-26( )* 21-33137-22( ) 21-33137-26( )* 8 8 i ii ** rg-59b/u, rg-62a/u, rg-62b/u, rg-210/u 21-33012-36 21-33011-36 8 ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-18 ( b) m22520/5-45 ( b) 11-8676-3 11-8369-5 11-8660-5 11-7880-8 11-8154-1 21-33038-36* 21-33037-36 8 ii 4 21-33138-36( )* 21-33137-36( ) 8 ii ** rg-140/u, rg-302/u 21-33012-37* 21-33011-37* 8 ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-17 ( b) m22520/5-05 ( a) m22520/5-19 (b) m22520/10-07 ( a) 11-8676-2 11-8369-5 11-8660-5 11-7880-8 11-8154-1 21-33038-37* 21-33037-37* 8 ii 4 21-33138-37( )* 21-33137-37( )* 8 ii ** rg-161/u, rg-174a/u, rg-179b/u, rg-187a/u, rg-188a/u, rg-316/u 21-33012-34 21-33012-30 21-33011-34 21-33011-30 8 8 i ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-12 ( b) m22520/5-03 ( a) m22520/5-08 (a) m22520/5-35 ( b) m22520/10-05 ( a) 11-8676-2 11-8369-2 11-8660-2 11-7880-8 11-8154-1 21-33038-34 21-33038-30 21-33037-34 21-33037-30 8 8 i ii 4 21-33138-34( )* 21-33138-30( )* 21-33137-34( )* 21-33137-30( )* 8 8 i ii ** 21-33012-1 21-33012-4 21-33011-1 21-33011-4 12 12 i ii 2 0.0200 0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12 11-8154-2 21-33038-1* 21-33038-4 21-33037-1* 21-33037-4* 12 12 i ii 4 21-33138-1( )* 21-33138-4( )* 21-33137-1( ) 21-33137-4( )* 12 12 i ii ** rg-178b/u, rg-196a/u 21-33012-35 21-33011-35 8 i 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-11 ( b) m22520/5-03 ( b) m22520/5-33 ( b) m22520/10-05 ( a) 11-8676-2 11-8369-1 11-8660-1 11-7880-8 11-8154-1 21-33038-35 21-33037-35 8 i 4 21-33138-35( )* 21-33137-35( )* 8 i ** 21-33012-3* 21-33012-5 21-33011-3* 21-33011-5 12 12 i ii 2 0.0200 0.0005 0.128 0.172 1.092 1.072 11-8676-1 11-7880-12 11-8154-2 21-33038-3* 21-33038-5 21-33037-3* 21-33037-5* 12 12 i ii 4 21-33138-3( )* 21-33138-5( )* 21-33137-3( )* 21-33137-5( )* 12 12 i ii ** note: contacts can be ordered by part numbers given in chart ** see finish options for se crimp miniature contacts listed on page 70. replace the paren- thesis of the contact part number with the finish suffix number. however, you should con- sult amphenol sidney ny regarding the availability of all finish choices for each part * consult amphenol, sidney ny for availability crimping tools: italicized letters in parenthesis that follow positioner part numbers indi- cate applicable die closure. commercial equivalents with the same die closure dimension may be used note: all contacts of the same size and the same inner and outer contact diameters (g & h) will mate with each other. mating pin dia h g socket f l mating pin dia h g pin f l
75 coaxial contacts for miniature cylindric al connectors, cont. crimp se (mil-c-26482 series 1 type) - application data, cont. se crimp coax contacts for use in miniature crimp type connectors: pt-se, sp-se, ms/pt-se and pc-se styles cable contact part number contact size type (see pg. 23) finish on mating parts (see pg. 23 ) dimensional data (see drawings pg. 25) crimp ferrule tools retainer nut wrench installation tools g dia. h dia. 0.001 f across flats 0.004 l length ref. insertion removal pin socket pin socket mil-t-22910/7-1 tool use with die part number mil-c-22520/5-01 tool use with die part number mil-c-22520/10-0 tool use with die part number rg-180b/u, rg-195a/u 21-33012-24 21-33012-46* 21-33011-24 21-33011-46* 8 8 i ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22520/7-15 ( b) m22520/5-05 ( b) m22520/5-41 ( b) m22520/10-07 (b) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 21-33038-24 21-33038-46* 21-33037-24 21-33037-46* 8 8 i ii 4 21-33138-24( )* 21-33138-46( )* 21-33137-24( )* 21-33137-46( )* 8 8 i ii ** raychem 9527e1118, rg-180b/u, rg-195a/u 21-33106-40( ) 21-33105-40( ) 12 iii ** 0.0200 0.0005 0.128 0.899 0.879 daniels gs200 tool with g2p330 or m22520/31-01 tool with positioner m22520/31-02 11-8674- 12 11-7880-12 11-8154-2 rg-188 or rg-316 double braid 21-33012-6* 21-33012-7* 21-33011-6* 21-33011-7* 12 12 i ii 2 0.0200 0.0005 0.128 0.172 1.092 1.072 m22910/7-13 ( b) m22520/5-37 ( b) 11-8676-1 11-8369-2 11-8660-2 11-7880-12 11-8154-2 21-33038-6* 21-33038-7* 21-33037-6* 21-33037-7* 12 12 i ii 4 21-33138-6( )* 21-33138-7( )* 21-33137-6( )* 21-33137-7( )* 12 12 i ii ** thermax 50c-25a- ds-1 21-33012-44 21-33011-44 8 ii 2 0.0355 0.0010 0.128 0.280 1.156 1.144 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 21-33038-44* 21-33037-44* 8 ii 4 21-33138-44( )* 21-33137-44( )* 8 ii ** rg-195 double braid 21-33012-28 21-33011-28 8 i 2 0.0355 0.0010 0.128 0.280 1.156 1.144 m22910/7-16 ( b) m22520/5-43 ( b) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 21-33038-28* 21-33037-28* 8 i 4 21-33138-28( )* 21-33137-28( )* 8 i ** rg-122/u, raychem 5022e5111 21-33012-23 21-33012-27 21-33011-23 21-33011-27 8 8 i ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22520/7-15 ( b) m22520/5-05 ( b) m22520/5-41 ( b) m22520/10-07 (b) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 21-33038-23* 21-33038-27 21-33037-23* 21-33037-27 8 8 i ii 4 21-33138-23( )* 21-33138-27( )* 21-33137-23( )* 21-33137-27( )* 8 8 i ii ** raychem 9530d5314 21-33012-31 21-33011-31 8 i 2 21-33038-31 21-33037-31 8 i 4 21-33138-31( )* 21-33137-31( )* 8 i ** raychem 9527a1317 21-33012-39 21-33011-39 8 ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-15 ( b) m22520/5-05 ( b) m22520/5-41 ( b) m22520/10-07 (b) 11-8676-2 11-8369-4 11-8660-4 11-7880-8 11-8154-1 21-33038-39* 21-33037-39* 8 ii 4 21-33138-39( )* 21-33137-39( )* 8 ii ** raychem 7527a1318 21-33012-40* 21-33011-40 8 ii 2 0.0355 0.0010 0.218 0.280 1.156 1.144 m22910/7-12 ( b) m22520/5-03 ( a) m22520/5-08 ( a) m22520/5-35 ( b) m22520/10-05 ( a) 11-8676-2 11-8369-2 11-8660-2 11-7880-8 11-8154-1 21-33038-40* 21-33037-40* 8 ii 4 21-33138-40* 21-33137-40( )* 8 ii ** westrex 199-49-1, tensolite 30850/87t-1 21-33012-43 21-33011-43 12 ii 2 0.0200 0.0005 0.128 0.172 1.092 1.072 m22910/7-11 ( b) m22520/5-03 ( b) m22520/5-33 ( b) m22520/10-05 (b) 11-8676-1 11-8369-1 11-8660-1 11-7880-12 11-8154-2 21-33038-43 21-33037-43 12 ii 4 21-33138-43( )* 21-33137-43( )* 12 ii ** note: contacts can be ordered by part numbers given in chart ** see finish options for se crimp miniature contacts listed on page 70. replace the paren- thesis of the contact part number with the finish suffix number. however, you should con- sult amphenol, sidney, ny regarding the availability of all finish choices for each part number. * consult amphenol, sidney ny for availability crimping tools: italicized letters in parenthesis that follow positioner part numbers indi- cate applicable die closure. commercial equivalents with the same die closure dimension may be used. note: all contacts of the same size and the same inner and outer contact diameters (g & h) will mate with each other.
76 coaxial contacts for miniature cylindric al connectors, cont. crimp ce (mil-c-26482 series 1 type) - application data ce crimp coax contacts for use in miniature crimp type connectors: pt-ce, sp-ce and pc-ce styles cable contact part number contact size dimensional data (see drawings above) crimp ferrule tools retainer nut wrench installation tools g dia. 0.001 h dia. 0.001 f across flats 0.004 l length ref. pin socket pin socket mil-t-22910/7-1 tool use with die part number mil-c-22520/5-01 tool use with die part number mil-c-22520/10-01 tool use with die part number insertion removal rg-58c/u, rg-141a/u, rg-303/u 21-33024-1 21-33023-1 8 0.040 0.219 0.280 1.239 1.285 m22910/7-15 ( b) m22520/5-01 (b) m22520/5-41 (b) m22520/10-07 ( b) 11-8676-2 11-8369-4 11-8660-4 11-7310 rg-178b/u, rg-196a/u 21-33024-2 21-33023-2 8 0.040 0.219 0.280 1.039 1.085 m22910/7-11 ( b) m22520/5-03 ( b) m22520/5-33 ( b) m22520/10-05 ( b) 11-8676-2 11-8369-1 11-8660-1 11-7310 note: contacts can be ordered by part numbers given in chart * consult amphenol, sidney ny for availability contact finish: for all contacts in this series feature 0.000050 minimum gold (knoop hardness 130-200). crimping tools: italicized letters in parenthesis that follow positioner part numbers indicate applicable die closure. commercial equivalents with the same die closure dimension may be used. note: all contacts of the same size and the same inner and outer contact diameters (g & h) will mate with each other. socket h l g mating pin dia f pin h l g mating pin dia f
77 f f r b cut-out for pt only pin location for pc only s ection jam nut mounting s flange mounted connectors all flange mounting pc and pt connectors use standard ms mounting dimensions. they cannot be back panel mounted due to coupling clearance. the ptb (thru-bulkhead) type con- nector must also be back panel mounted on one side. flange gaskets are available for both series, see page 64. shell size r (tp) d dia. pc & pt sp pc & pt sp 6 .469 .641 .323 .439 8 .594 .734 .449 .563 10 .719 .812 .573 .680 12 .812 .938 .699 .859 14 .906 1.031 .823 .984 16 .969 1.125 .949 1.108 18 1.062 1.203 1.073 1.233 20 1.156 1.297 1.199 1.358 22 1.250 1.375 1.323 1.483 24 1.375 ? 1.449 ? jam nut mountings the jam nut design has become ve ry popular because it allows bench wiring of harness assemblies. the labor saving often off- sets the added cost of the jam nut receptacle which is due to the self contained ?o? ring and the extra nut. the pc series mounts in a round hole and can be pinned to prevent rotation. the pt series mounts in a ?d? mounting hole and does not require pinning. shell size r +.010 ?.000 b +.000 ?.010 f .010 p panel thickness min. max. 6 .447 .420 .286 .062 .125 8 .572 .542 .331 .062 .125 10 .697 .669 .375 .062 .125 12 .884 .830 .442 .062 .125 14 1.007 .955 .486 .062 .125 16 1.134 1.084 .530 .062 .125 18 1.259 1.208 .573 .062 .125 20 1.384 1.333 .641 .062 .250 22 1.507 1.459 .685 .062 .250 24 1.634 1.575 ? .062 .250 hermetic receptacle mountings this series must be mounted in such a way as to preserve the hermetic seal provided by the glass insert. mounting data for box and jam nut receptacles is given above. cut-out required for solder mounting receptacles (n) is given below. shell size n max. 6.458 8.582 10 .692 12 .801 14 .926 16 1.051 18 1.176 20 1.395 22 1.375 the finish of each of these hermetic receptacles is fused electro-deposited tin for easy solderability, and protected by a special lacquer for optimum shelf life. the lacquer will not interfere with any soldering operation. low temperature solder should be used and the addition of a solder fillet at arrow points on drawing at right is rec- ommended. care must be taken that the operating temperature of the final assembly does not rise above the melt - mounting recommendations for miniature cyli ndrical connectors connector mounting recommendations n cut-out s older receptacle jam nut receptacle ( s ee dimen s ion s ab ove) box receptacle ( s ee dimen s ion s ab ove) hermetic receptacle s r (tp) r 2 d dia. r 2 .120 dia. for shell sizes 6-22 pc & pt .147 dia. for size 24 pt .150 dia. for sp only 4 holes cut-out section no. 4 screw for pc & pt no. 6 screw for sp and for size 24 pt flange mounted connectors
78 mil-c-26482, series 2 mil-c-26482, series 2 connectors are provided with the amphe- nol ? /matrix ? family of miniature cylindricals these are bayonet coupling type, and they feature crimp contacts that are rear insert- able and rear releasable. there are six shell styles available and 34 insert arrangements. military part numbers of the matrix mil-c-26482 family include the following: ms3470 wall mounting receptacle with narrow flange ms3472 wall mounting receptacle with wide flange ms3471 cable connecting receptacle ms3474 jam nut receptacle ms3476 straight plug ms3475 plug with rfi grounding fingers see catalog 12-071 for more information. geophysical miniature cylindricals designed for the geophysical industry?s rugged environments, the amphenol ? geophysical series connector has custom features that provide reliability in extreme temperature and moisture condi- tions. the unique shell design provides stronger shells along with an anodized (nonconductive) finish for greater salt, corrosion and abrasion resistance. coupling nuts are manufactured with round detent holes and are sold separately for greater customer flexibil- ity. see product data sheet #146. rj field bayonet mil-c-26482 cylindricals amphenol pcd division provides mil-c-26482 bayonet coupling cylindrical connectors with an rj45 ethernet interface*. these are designed for use in all levels of harsh environments from industrial to mil-aero applications providing ip67 protection from dust, fluids, vibration, shock and traction. the amphenol ? rj field allows the use of ethernet class d/cat 5 and cat 5e connections for 10 baset, 100 base tx, or 1000 baset networks. it works with any standard rj45 cordset with no extra tooling. it also offers rein- forced emi protection. for more information go online to www.rjfield.com or ask for the field series brochure. * other field series products are available through amphenol pcd. these include rjf tv within mil-dtl-38999 series iii threaded coupling connectors, and rjf 544 within ecta push-pull plastic shell coupling. other amphenol miniature cylindrical connectors geophysical miniature cylindricals mil-c-26482 series 2 rj field bayonet mil-c-26482 cylindricals

▲Up To Search▲

Price & Availability of 71-251181

	To Download 71-251181 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .